X10 SMART Wireless Motion Detector
Detects Motion Up To 40 Feet Away
Designed for use with the X10 SecuriLINK Console (SC1200), the X10 SMART Wireless Motion Detector alerts you when motion is detected up to 30-40 feet away. The motion detector features pet immunity, so small dogs and cats will not trigger false alarms. You also have the option of setting the detector to "Home Mode", which temporarily deactivates the sensor and allows you to walk freely around your home without triggering an alarm.
- Detects motion up to 40 feet away
- Ignores small pets to prevent false alarms
- "Home Mode" temporarily deactivates sensor
- Tamper-resistant: triggers alarm if removed
- Works with the X10 SecuriLINK Console
- Motion Detector
- Mounting Bracket
- Mounting Screws
Note: Requires two (2) AA batteries (not included).
The X10 Motion Detector is an X10 Wireless Transmitter
A basic wireless X10 system includes a Transmitter, a Transceiver and a Receiver – each sold separately. Wireless Transmitters are control devices that broadcast X10 radio frequency (RF) signals to Transceivers, which plugs into standard wall outlets. The Wireless Transceiver then converts the RF signal into an X10 signal and transmits it through your home's electrical wiring to X10 Receivers. When an X10 Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.
X10 manufactures home automation products using X10 powerline carrier and wireless technologies. Have complete, automated control over lights and appliances from anywhere in your home with X10.
- Power Supply: Two (2) AA batteries (not supplied)
- Detection Range: 30 to 40 feet
- Approvals: FCC