Skip to main content
  • Home
  • X10 Big Red Wireless Emergency Button

X10 Big Red Wireless Emergency Button

SKU: XTKR15A

Usually ships in 3-5 days.

$18.95

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Details

Works With Any X10 Transceiver

Immediately activate any X10 receiver(s) by hitting the X10 Big Red Wireless Emergency Button during an emergency. The battery-powered button can be mounted anywhere in your home with double-sided tape. It's perfect for use as a bedside panic button, or even a doorbell button. Use it to activate X10 lamp modules, sirens, security consoles, or any other X10 receiver!

  • Activates any X10 receiver
  • Wireless range up to 100 feet
  • Mounts with double-sided tape
  • Works with any X10 transceiver

In an emergency, push the BIG RED button, holding it down for 4 seconds. It will send an RF (radio frequency) signal to any X10 receiver set to the same House Code and Unit Code. If set to trigger the X10 security console, the BIG RED button will trigger an alarm. The lights flash, the siren sounds, and the console calls your monitoring station for help (if your system is monitored).

NOTE: Requires an X10 transceiver or wireless security system base receiver (sold separately). Also requires two (2) AAA batteries (not included).

The X10 Big Red Emergency Button is an X10 Wireless Transmitter

A basic wireless X10 system includes a Transmitter, a Transceiver and a Receiver – each sold separately. Wireless Transmitters are control devices that broadcast X10 radio frequency (RF) signals to Transceivers, which plugs into standard wall outlets. The Wireless Transceiver then converts the RF signal into an X10 signal and transmits it through your home's electrical wiring to X10 Receivers. When an X10 Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.

X10 Makes It So Easy To Automate Your Home!

X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.

Specifications

  • Power Source: Two (2) AAA batteries (not included)
  • Wireless Range: Up to 100 feet

Downloads