Skip to main content
  • Home
  • X10 PRO Dimmer Wall Switch

X10 PRO Dimmer Wall Switch


Please Select Option To View Availability


WARNING: Cancer and Reproductive Harm –


Gradually Fades Light On & Off

You can remotely turn on/off and dim/brighten a dimmable light fixture with the X10 PRO Soft Start Dimmable Wall Switch. When you turn your light on, the switch's "Soft Start" feature gradually brightens your light within two seconds. When you turn it off, the light gradually fades. This is easier on your eyes as well as the bulbs.

  • Controls dimmable incandescents up to 500W
  • Provides local pushbutton and X10 remote control
  • Dimmable via X10 remote (not local)
  • Power cutoff switch for bulb changing

In addition to "Soft Start", this wire-in dimmer switch also conveniently remembers your chosen dim level, so when you turn the light off and back on again, it will automatically resume the same brightness.

NOTE: Do not use with appliances, motors, low voltage lights or fluorescent lights.

The X10 PRO Dimmable Wall Switch is an X10 Wired-In Receiver

A basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home's electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.

X10 Makes It So Easy To Automate Your Home!

X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.


  • Power Requirements: 120 VAC, 60 Hz
  • Load Range: 40W to 500W
  • Compatible Load Type: Incandescent only (no fluorescent)