• Home
  • Speco 2MP Intenisifer Board IP Camera, 2.9mm Fixed Lens and 3.6mm Pinhole Lens Included

Speco 2MP Intenisifer Board IP Camera, 2.9mm Fixed Lens and 3.6mm Pinhole Lens Included


Usually ships in 3-5 days.


WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Versatile Surveillance Through Two Camera Lenses

Add the right perspective to your surveillance network with the Speco Technologies 2MP Intensifier Board IP Camera, with 2.9mm Fixed and 3.6mm Pinhole Lenses. This HD IP security camera captures footage in 1080p @ 30fps and gives you options for capturing footage in standard or low-light conditions. Speco Technologies Intensifier technology combined with the included pinhole lens allows for the Board Camera to watch over low-light environments without IR LEDs.

  • Board camera captures AV HD 1080p @ 30fps
  • 2.9mm fixed lens and 3.6mm pinhole lens included
  • Pinhole Lens enables the camera to see color in low light without IR LEDs
  • Miniature board design is perfect for tight spaces
  • Sensor input and relay output allow for automated events when integrated into a security system

The Speco 2MP Intensifier Board IP Camera can be controlled via Speco's web management tool and free Speco Mobile app when connected to a compatible network video recorder (NVR), sold separately. Through the web tool or the app, you can view live footage from connected cameras, adjust settings and customize presets for optimal, personalized performance.

Installation Details

Place the mounting base onto a flat surface and drill the mount into place. Route and connect the Speco bullet camera's RJ45 cable before attaching the camera to the mounting base.


  • Network Board Camera
  • 2.9mm Fixed Lens
  • 3.6mm Pinhole Lens

NOTE: Network video recorders (NVR) sold separately. An internet connection is required for remote operation.

IMPORTANT NOTE: Speco Technologies products are not available to ship outside the U.S. Please contact Speco Technologies directly for international orders.

Speco Technologies

For over 45 years, SPECO Technologies has been dedicated to providing the highest quality residential and commercial sound, security, CCTV closed circuit video and electronic accessories. Contractors, installers, builders, engineers and architects rely on Speco products to satisfy both their commercial and residential needs.


  • Manufacturer Part #: O2IBD3

Camera Specifications

  • Image Sensor: Progressive scan 1/2.8" CMOS, 2MP
  • Maximum Resolution: 1920 x 1080
  • Minimum Illumination Color: F1.4, 0 lux (max. Intensify)
  • Field of View: 117° (2.8mm) – 85° (3.6mm) degrees
  • White Balance: ATW / AWB
  • Compensation: WDR
  • Electronic Shutter Speed: 1/25 ~ 1/100000 sec
  • DNR: 2D/3D

Video Specifications

  • Main Resolution: 1080P (1920x1080 ) / 720P (1280x720) @ 30fps
  • Video Compression: H.264 (HP/MP/BP), MJPEG
  • Bitrate Control: VBR, CBR
  • Multiple Streaming: 3 simultaneous streams

Audio Specifications

  • Mono Input/Output: G.711

Network Specifications

  • Protocols: IPv4, TCP, UDP, RTP, RTSP, HTTP, SMTP, FTP, DHCP, UPnP, DNS
  • DDNS Support: Speco DDNS (free of charge)
  • Security: User ID & Password protection, IP/MAC address filtering, digest authentication
  • User Access: Max. 8 simultaneous users. *Actual number of users may vary depending on bandwidth

Client Specifications

  • Web Browser Support: Windows (Internet Explorer 8 and up)
  • PC Application: SecureGuard VMS
  • Mobile: SecureGuard Client (iPhone and Android™)

External Terminal Specifications

  • Ethernet: 10/100 Mbps
  • Alarm: 1 sensor input, 1 relay output (terminal block)
  • Audio: 1 mic in, 1 line out (terminal block)
  • Power: Terminal block

System Specifications

  • PoE: Standard (IEEE 802.3af)
  • Analytics: Motion detection, tampering, sensor input
  • Alarm Triggers: Analytics
  • Alarm Events: FTP upload, email upload, micro SD card recording, relay output
  • Image Settings: Privacy mask

Operating & Unit Specifications

  • Power: PoE, 12VDC (power supply not included)
  • Power Consumption: 12W (max)
  • Operating Temperature: -22 to 104 degrees F (-30 to 40 degrees C)
  • Unit Dimensions: 3.9" (Dia.) x 11" (H)
  • Unit Weight: 2.3 lbs.
  • Warranty: 5 Year