Simply Automated UPB Plug-In Inverting Phase Coupler, 30A or 50A
Plug-In Models Work With UPB, X10 & Broadband
Simply Automated's Inverting Phase Couplers (model ZPCI) boost UPB signals between split phases. Model ZPCI-P30A and ZPCI-P50A are Plug-in Universal Inverting Phase Coupler, and connects to a 30Amp (-P30A) or 50Amp (-P50A), 220 VAC, 3-prong receptacle used for clothes dryers, air conditioning units or stoves.
Phase couplers boost powerline signals by providing a bridge between the two, 120 VAC electrical phases (A and B) in a split-phase, 240 VAC home. Without a phase coupler, signals travel out to the street-side transformer on one phase and comeback in the home ‘inverted' on the other phase, usually at a lower (attenuated) level.
A Universal Inverting Phase Coupler is recommended in every main breaker panel and sub-panel to ensure maximum signal strength. In homes up to 2,000 square feet and within 100 feet of the transformer, phase coupling may not be needed for UPB. However, as the size of the home and distance from the transformer increase, phase coupling becomes more important.
The Universal Inverting Phase Couplers are universal, meaning they pass UPB, X10 and other higher frequency signals. They are unique because they use an internal transformer to invert the signal between phases and isolate the internal capacitance. The inverted signal, phase coupled at the breaker panel, adds signal strength to the inverted signal returning from the street-side transformer. Because the internal transformer of the inverting phase coupler isolates the capacitance of the phase coupler, more than one can be used in a home without the additional capacitance attenuating signals. The net effect is higher signal strength and less attenuation.
The ZPCI series of Universal Inverting Phase Couplers is unique in many ways. Unlike conventional phase couplers, multiple ZPCI units can be used in a home – one ZPCI per breaker panel, for example. This is not the case for conventional phase couplers, where only one can be used per home. The Inverting Phase Coupler avoids the issues of conventional phase couplers:
- Avoids additional capacitance that attenuates signals, and
- Avoids non-inverted signals cancelling inverted signals. Inverting phase couplers can eliminate the need of split phase repeaters.
The Perfect Fit: Phase coupling is most effective at the main breaker panel and sub-panels where models ZPCI-B (breaker box model) and ZPCI-W (wired-in model) fit. Both of these models have surge suppression and status LEDs. For quick and easy installation in small (one main breaker panel) homes, the plug-in model ZPCI-P can be used.
UPB Switches & In-Wall Controllers From Simply Automated
Simply Automated, Inc (SAI) provides an ultra-reliable powerline-based control technology that is as easy to install as it is to use. Universal Powerline Bus (UPB) technology significantly improves the reliability of control applications in the home. Through diligent testing, field trials, and residential installations, UPB has been proven to be greater than 99.9% reliable, so you can install it and forget about it!
- Manufacturer Part #:
- ZPCI-P30A : 30A
- ZPCI-P50A : 50A
- Operating Voltage: Two-phase, 120VAC ± 10% per phase
- Operating Temp: -40 to 50° C
- Dimensions: 2.0"H x 2.5"W x 16.9"D (51 x 63 x 429mm)
- Weight: 1.57 lbs. (2.22 Kg)
- Mounting: Receptacle: 220 VAC, NEMA 10-30 or 10-50
- Warranty: 2 Year
UPStart UPB Software
This Windows-based application, along with a UPB Powerline Interface Module (PIM), allows you to program, configure and test your UPB smart home automation system. »Free download here