Sensative Strips Drip 700 Water Leak & Temperature Sensor, with Magnet
The Perfect Sensor to Catch Leaks in Tight Spots
Know when water pools in hard to reach places with the Sensative Strips Drip 700 Water Leak & Temperature Sensor, with Magnet. This Z-Wave Plus ultra-thin water and temperature sensor notifies you when leaks or extreme temperatures are detected, as well as reporting ambient room temperature. The miniscule design of this Z-Wave sensor allows it to be installed where other leak sensors can't fit, ensuring that you have the most complete safety coverage within your home. Once the smallest drop of liquid is detected, or water temperatures drop into freezing levels, the Strips Drip will send a signal to your Z-Wave controller to notify you of the potential danger.
- Ultra-thin Z-Wave Plus sensor notifies you when water leaks or freezing temperatures are detected
- Senses water on most hard surfaces in 1-100% increments
- Also monitors ambient room temperature
- Communicates with Z-Wave devices up to 300 feet (100 meters)
- Compatible with most Z-Wave controllers, plus Ring, Raspberry Pi and more
- Up to 10 years battery life
The Strips Drip 700 Water Leak & Temperature Sensor', with Magnet, design allows for universal installation and is built to perform in any type of environment. The sensor is water resistant, withstands extreme temperatures, senses moisture percentage, and is ideal for both indoor and outdoor applications. With a battery life of up to 10 years, the Strips Drip 700 is built for consistent and reliable reporting throughout your home.
Installing the Strips Drip 700 Sensor, with Magnet is simple. The sensor comes with mounting hardware to secure it into your preferred location and it only needs a few seconds to be added to your Z-Wave network.
Z-Wave Plus v2 Certification
Z-Wave Plus v2 is an upgraded Z-Wave certification program to help you identify products that take advantage of the latest Z-Wave hardware platform, also known as 700 Series or Gen7 Z-Wave. Z-Wave Plus v2 compatible devices include extended wireless range up to 2600 ft/800 m, three layers of encryption, faster operation, and longer battery life.
- Mounting Plate
- Cleaning Sachet
- Quick Start Guide
- Compatible Z-Wave controller or hub sold separately.
- As of 4/1/22 these Z-Wave 700 series devices do not work with SmartThings brand controllers until Smartthings updates their firmware to support OTA.
Sensative: Empowered By Data
Since 2015, Sensative has been an innovator in the smart home market, designing unique and elegant products to make life at home easier, safer, and smarter. With an ultra thin design, Sensative Strip Sensors can be installed discreetly and seamlessly without being obtrusive to the eye.
- Manufacturer Part #: 11040221
- EAN: 7350088520437
- Frequency: 908.4/916 MHz
- Leak detection alarm
- Ambient light reporting (0 to 64000 LUX)
- Temperature reporting and alarm
- Z-Wave Notifications:
- Basic reporting types
- Temperature Accuracy Ranges:
- ± 2 °C between -20 to 0°C (-4 to 32°F)
- ± 1 °C between 0 to 30°C (32 to 86°F)
- ± 2 °C between 30 to 60°C (86 to 140°F)
- Range: Up to 100 meters, signal may be extended up to 150m with Z-Wave repeaters
- Sensor: 195 H x 15 W x 3 D mm (7.68 H x 0.59 W x 0.11 D in)
- Mounting: 193 x 14.7 x 2.7 mm (7.60 H x 0.58 W x 0.11 D in)
- Operating Conditions: -20 to 60°C (-4 to 140°F)
- Power Supply: Built-in LiMnO2 battery. Lasts up to 10 years.
- Magnetic Range: 15mm (0.6 in)
- Wake Up Intervals: 30mins to 24 hours (default 24H)
»Sensative Strips 11040221 Drip Z-Wave Water and Temperature Sensor Spec Sheet (.pdf)
»Sensative Strips 11040221 Drip Z-Wave Water and Temperature Sensor Quick Start Guide (.pdf)
»Sensative Strips 11040221 Drip Z-Wave Water and Temperature Sensor Installation Manual (.pdf)
»Sensative Strips 11040221 Drip Z-Wave Water and Temperature Sensor Warranty (.pdf)