Seco-Larm Enforcer Mortise Cylinder Key Switch
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
Secondary Access Control Device for Backup
Back up your access control system with the Seco-Larm Enforcer Mortise Cylinder Key Switch, a DPDT momentary switch with color-coded wires. If your primary access control keypad or proximity reader fails to operate your electromagnetic lock as expected, you can force the door/gate to unlock using this simple wire-in turnkey switch, which switches between normally closed (N.C.) and normally open (N.O.) contacts. Two identical keys are included (cannot be replaced).
- Keyed mortise cylinder for backup access control
- Single-gang plate flush-mounts in a single-gang box
- Removable mortise cylinder facilitates keying
- Includes two keys and mounting hardware
- Vandal-resistant screws help prevent tampering
The Mortise Cylinder Key Switch features a removable mortise cylinder to make keying easy. The unit consists of a chrome-plated aluminum back plate that installs into a single-gang box with the included mounting screws, and a stainless-steel front cover that hides the screws to create a clean, flush appearance.
Contents
- Front Cover
- Back Plate
- (2) Keys
- (2) Vandal Screws
- Security Wrench
Note: Replacement keys are NOT available. Be sure to make extra copies of the two included keys.
Building A Secure Future Since 1971
So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it’s physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.
Specifications
- Manufacturer Part #: SD-72081-6MQ
- Switch Type: DPDT Switch (momentary)
- Contact Rating: 5A@125VAC, NO/NC
- Dimensions: 2-3/4 x 4-1/2 x 1-7/16 inches (69 x 114 x 37 mm)
- Approvals: RoHS
- Warranty: 1 Year