• Home
  • Seco-Larm Enforcer CBA Wireless Indoor PIR Sensor

Seco-Larm Enforcer CBA Wireless Indoor PIR Sensor


Huge Savings! (All Sales Final.)

1 available at this price.

$21.15 $30.16

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Indoor Motion Detector for Wireless Alerts

Perfect for monitoring any indoor area, the Seco-Larm Enforcer CBA Wireless Indoor PIR Sensor detects motion up to 26 feet away within a wide 80-degree field of view. When motion is detected, the battery-powered wireless sensor triggers an alert at your wireless receiver. The sensor is compatible with any Seco-Larm "RA-4961" series wireless receiver (sold separately). Designed for DIY setup, it easily mounts to a wall or other flat surface with the included bracket, which allows you to adjust the sensor's viewing angle.

  • Alerts you when motion is detected indoors
  • Works with any "RA-4961" series receiver
  • Wireless range up to 1,000 feet
  • Low battery alert triggers blinking at receiver
  • Easily mounts with bracket and screws (included)


  • Wireless Indoor PIR Sensor
  • Sensor Bracket
  • (2) Screws
  • (2) Screw Anchors
  • Instruction Manual

NOTE: Requires a Seco-Larm "RA-4961" Series wireless receiver (sold separately). Battery not included. Requires a 9-volt battery. Not suitable for outdoor use.

Building A Secure Future Since 1971

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it's physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.


  • Manufacturer Part #: RA-4961-PRQ
  • Frequency: 914.8MHz
  • Transmission Range: Up to 1,000 feet (305m)*
  • Channels: 1
  • Power Supply: 1 x 9VDC Battery (not included)
  • Current Draw: Standby: 7µA; Max: 18mA
  • Estimated Battery Life: 300 days (3 triggers/day)
  • Low Battery Indicator: Zone LED on receiver blinks continuously
  • PIR Sensor Range: 26 feet (8m)
  • PIR Sensor Detection Angle: 80 degrees horizontal
  • Operating Temperature: -4° to 140°F (-20° to 60°C)
  • Dimensions: 2-7/16 x 1-15/16 x 3-9/16 inches (62 x 49 x 90 mm)
  • Warranty: 1-Year Limited

*Line of sight. Transmission range will vary depending on installation and operating environment.