• Home
  • Platinum Tools T62 Recon Test Set

Platinum Tools T62 Recon Test Set

Usually ships within 1-2 business days

SKU: PLT62
$242.89

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Advanced Line Analyzer In Drop-Proof Design

The Platinum Tools T62 Recon Test Set is a professional telecommunication line analyzer that offers sophisticated data in-line discovery and protection. This set features a complete array of options for measuring data, actively monitoring lines, and detecting high line voltages. It also includes a Digi-Secure feature that protects digital lines from disruption by outside test equipment.

  • Advanced data detection and identification
  • Large backlit display with glow-in-the-dark keypad
  • 100-percent data safe
  • Rugged, weatherproof case
  • Drop-proof (tested at 20 feet)

The large backlit display shows information clearly, and with a glow in the dark keypad, the Recon can be used in low light environments. The Recon is also 100 percent weather and rainproof for outdoor use anytime.

Note: The loudspeaker and backlight draw a large amount of power. They can discharge the battery quickly if used at high volume with the backlight at 100 percent on a line with high audio.

Platinum Tools Makes Connections Easy!

Founded in 1997, Platinum Tools was created based upon two very simple objectives. First, develop and source the absolute best possible solutions for the preparation, installation and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely and high quality manner. All of their products absolutely must satisfy three critical benchmark criteria – utility of function, quality of function and economic value.

Product Features

  • 60-inch Angled Bed-of-nails and Piercing clip cord set
  • Speaker with fine volume adjustment
  • Noise cancelling microphone
  • Microphone mute with toggle on/off locking feature
  • Soft key menu system
  • Metal spring-loaded belt clip
  • Cushion boot for extra protection
  • Off-hook current and polarity
  • On-hook voltage and polarity
  • On-hook and call waiting Caller ID info
  • Amplified Line Monitor for volume levels comparable to "off hook" operation
  • 8 number Stored memory with Alpha/Numeric tags
  • Fuel Gauge Battery condition
  • Continuous Polarity Indication
  • Caller ID/Call Waiting and Caller ID error detection
  • Tone and Pulse dialing
  • Configurable Auto Off in all modes
  • Detects and identifies DSL and T1 lines
  • Last number dialed, redialed or received
  • Multilingual (English, French, Spanish)
  • Backlight 0-100 percent adjustable with on/off option

Technical Details

  • Size: 21 x 6.4 x 5.1 cm (8.25 x 2.5 x 2.0 inches) (Without belt clip and cord set)
  • Weight: 559.7 grams (19.74 oz.) (With battery, cord set and belt clip)
  • Input Protection: To 270 volts peak AC or DC
  • Battery Low Level: Approximately 4 volts
  • Power: 4 x AAA alkaline batteries
    • Operation: 7 hours min. 150 hours max.
    • Standby: 2 years
    • Active: approximately 43 hours
  • Operating temperature: 0 to 50 degrees C (32 to 122 degrees F)
  • Storage temperature: -20 to 60 degrees C (-4 to 140 degrees F)
  • Humidity: 10 to 90 percent, non-condensing
  • Altitude: 3,050 meters (10,000 feet) maximum
  • Interface: Attached cord set
  • Languages: English, Spanish and French
  • Ringer Equivalence: In BELL mode: 0.0 (no ringer load)
  • Pulse Dialing:
    • Pulse rate: 10 pps, ±10 percent
    • Make/break ratio: 60 to 40 percent, ±2 percent; USA
    • Interdigit interval: 820 ms
    • Resistance during break: 120K Ohms minimum
  • Tone Dialing: DTMF output (into 600 Ohms)
  • Tone-frequency error: ±1.5 percent
  • Tone Level:
    • High group: -6 ±2 dBm
    • Low group: -8 ±2 dBm
    • High group vs. Low group Difference (twist): 2 ±1 dBm
  • Flash Duration: 600 ±50 ms
  • Pause Duration:
    • Tone: 3 seconds
    • Pulse: 3.4 seconds
  • Memory: 8 programmable locations, 32 digits with 16 character tag, stored in non-volatile memory. Last number redial plus list of last 10 numbers dialed or received.
  • Return Loss: Minimum 14 dB at 600 Ohms
  • Line-Current Range: 10 to 110 mA
  • Apparent Line Resistance: 275 Ohms at 20 mA
  • Compliance: Complies with Conformite Europeenne (CE) directives