• Home
  • Platinum Tools Coax Clarifier with 2 Coax RF Remotes

Platinum Tools Coax Clarifier with 2 Coax RF Remotes

Usually ships within 1-2 business days


WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Test, Identify & Qualify Dark Coax Networks

The Platinum Tools Coax Clarifier (with 2 Coax RF Remotes) is a handheld dark coax system tester that allows you to quickly discern the layout of a dark (unpowered) coax network, locate faults on individual cable runs, identify remotes through splitters, and determine cable run lengths. Separate wire mapping sets can map the entire coax system and measure the quality and network characterization for carrying high-grade video, surveillance data and HD programming.

  • Fast testing using multiple wiremapping remotes
  • Quickly discover coax system layout configuration
  • Measures cable length up to 1,500 feet
  • Wiremaps up to 12 coax locations
  • Measures overall network quality, measured in dB

With the Coax Clarifier, you can map runs through splitters to show an accurate picture of the coax system layout using up to four Coax RF Remotes (two included). Up to 12 ID Only Coax Remotes are also available for wiremapping on home runs.

The Coax Clarifier also measures overall network quality and clearly depicts network reading as both a bar graph and a digital return loss number, measured in dB. The tester determines cable run length and reports the location of an open or unterminated cable. It also traces coax runs with four unique tones to quickly distinguish between respective outlets.


  • (1) No. 1 Coax RF Remote
  • (1) No. 2 Coax RF Remote
  • (1) Nos. 1 – 4 ID Only Coax Remote Set in Foam Holder
  • (1) Cable Assembly, Screw-On F-Jack to Push-On F-Plug Cable – 12"
  • (1) Adapter, F-Jack to BNC Jack
  • (3) Adapters, F-Jack to Push-On Plug
  • (3) F-Connector Couplers, F81
  • (4) F-Terminator Plugs
  • (1) Hanging Pouch
  • (4) AA alkaline batteries

Platinum Tools Makes Connections Easy!

Founded in 1997, Platinum Tools was created based upon two very simple objectives. First, develop and source the absolute best possible solutions for the preparation, installation and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely and high quality manner. All of their products absolutely must satisfy three critical benchmark criteria – utility of function, quality of function and economic value.

Product Features

  • 60-inch Angled Bed-of-nails and Piercing clip cord set
  • Speaker with fine volume adjustment
  • Noise cancelling microphone
  • Microphone mute with toggle on/off locking feature
  • Soft key menu system
  • Metal spring-loaded belt clip
  • Cushion boot for extra protection
  • Off-hook current and polarity
  • On-hook voltage and polarity
  • On-hook and call waiting Caller ID info
  • Amplified Line Monitor for volume levels comparable to "off hook" operation
  • 8 number Stored memory with Alpha/Numeric tags
  • Fuel Gauge Battery condition
  • Continuous Polarity Indication
  • Caller ID/Call Waiting and Caller ID error detection
  • Tone and Pulse dialing
  • Configurable Auto Off in all modes
  • Detects and identifies DSL and T1 lines
  • Last number dialed, redialed or received
  • Multilingual (English, French, Spanish)
  • Backlight 0-100 percent adjustable with on/off option

Technical Details

  • Size: 21 x 6.4 x 5.1 cm (8.25 x 2.5 x 2.0 inches) (Without belt clip and cord set)
  • Weight: 559.7 grams (19.74 oz.) (With battery, cord set and belt clip)
  • Input Protection: To 270 volts peak AC or DC
  • Battery Low Level: Approximately 4 volts
  • Power: 4 x AAA alkaline batteries
    • Operation: 7 hours min. 150 hours max.
    • Standby: 2 years
    • Active: approximately 43 hours
  • Operating temperature: 0 to 50 degrees C (32 to 122 degrees F)
  • Storage temperature: -20 to 60 degrees C (-4 to 140 degrees F)
  • Humidity: 10 to 90 percent, non-condensing
  • Altitude: 3,050 meters (10,000 feet) maximum
  • Interface: Attached cord set
  • Languages: English, Spanish and French
  • Ringer Equivalence: In BELL mode: 0.0 (no ringer load)
  • Pulse Dialing:
    • Pulse rate: 10 pps, ±10 percent
    • Make/break ratio: 60 to 40 percent, ±2 percent; USA
    • Interdigit interval: 820 ms
    • Resistance during break: 120K Ohms minimum
  • Tone Dialing: DTMF output (into 600 Ohms)
  • Tone-frequency error: ±1.5 percent
  • Tone Level:
    • High group: -6 ±2 dBm
    • Low group: -8 ±2 dBm
    • High group vs. Low group Difference (twist): 2 ±1 dBm
  • Flash Duration: 600 ±50 ms
  • Pause Duration:
    • Tone: 3 seconds
    • Pulse: 3.4 seconds
  • Memory: 8 programmable locations, 32 digits with 16 character tag, stored in non-volatile memory. Last number redial plus list of last 10 numbers dialed or received.
  • Return Loss: Minimum 14 dB at 600 Ohms
  • Line-Current Range: 10 to 110 mA
  • Apparent Line Resistance: 275 Ohms at 20 mA
  • Compliance: Complies with Conformite Europeenne (CE) directives