• Home
  • Linear e3 Stand-Alone Access Node, No Screen or Keypad

Linear e3 Stand-Alone Access Node, No Screen or Keypad

Usually ships within 3-5 business days

SKU: LNENEXN
$597.95

NOTE: This is a heavy/dimensional part; it is not eligible for free shipping.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Add Two Additional Doors to Your EN System

The Linear e3 Stand-Alone Access Node allows you to add two additional access control devices to your EN system within the same property. The EXN is network ready, allowing multiple units to be interconnected through a LAN connection. It includes a metal housing with (6) knockouts, hardware, an Input/Output board, (2) peripheral ports, a tamper lock, a 10/100 Ethernet port, supplies for mounting, and a keyed lock.

Hardware Features

Relay Outputs: Activate access devices, such as door strikes, magnetic locks, automatic doors, barrier gates, and automatic sliding gates using the (4) 3-amp dry contact Form-C SPDT relay outputs. Plus, you can also use the relay outputs as specialty outputs for alarm activation or alarm contact shunting.

Request-to-Exit (REX) Inputs: A request-to-exit input is provided with each door lock relay channel. The inputs are provided for hardwire activation of the access devices.

Door Switch Monitor (DSM) Inputs: The door switch monitor inputs connect to door switches that monitor whether the controlled door is open or closed.

Wiegand Reader Support: Add swipe card or proximity readers to the system with two Wiegand inputs (Reader A and Reader B). They can connect to various types of Wiegand output accessories (26, 30, and 31-bit).

PBUS Device Support: Control additional doors or gates in your system by configuring the Reader B port to connect to Linear brand PBUS accessories such as keypads and proximity readers.

Removable Programming Memory: The EXN removable 4GB SD card memory retains all entry codes, transmitter information, card access, and programming.

Power Management: The system is powered with a plug-in power supply using the included Power Distribution Module (PDM). If an AC power failure occurs, the Power Distribution Module will notify the system.

Network Support: Multiple units (EN-2A4, EN-2A7, EN-2A10, and EXN) can be networked together through a LAN connection or via an isolated RS-485 network, which will allow information sharing between the units. A common event log is retained for all of the networked units, and you'll be able to connect a computer to the network to store and retrieve memory data.

Contents

  • Stand-Alone Access Node
  • Hardware
  • Mounting Supplies
  • Keyed Lock
  • Manual

NOTE: The EXN is for indoor use only. DO NOT mount outside.

Security Products, Access Control & More By Linear

For more than forty years, Linear LLC has been known as a worldwide provider of radio based transmitters and receivers for the traditional security market. Millions of Linear transmitters have been sold over the years. Linear security products are offered via a worldwide network of distribution. While Linear continues to be a leading supplier of devices for the security market, we have expanded our products to include focused product lines in the Access Control, Remote Control and Garage Door Operator markets.

  • Manufacturer Part #: EN-EXN
  • Voltage: 11-13 Volts DC
  • Current: 750 mA
    • Outputs: Four Relays
    • Form "C" 3 Amps @ 24 Volts maximum
  • Inputs:
    • Two DSM door position inputs
    • Two REX exit request inputs
    • Two AUX auxiliary inputs
    • Four WIEGAND reader inputs (two IN, two OUT)
    • One PBUS input (supports up to six PBUS devices)
  • Network: LAN or RS-485 network
  • Temperature: -22° F to 149° F (-30°C to 65°C)
  • Humidity: 5% to 95% non-condensing
  • Case Dimensions: 13(W) x 14(H) x 3-1/12(D) inches (330 x 356 x 90 mm)
  • Credentials: FCC
  • Warranty: 2 Year