Linear SD Bill Trap Transmitter
Works Even When Cash Drawers Are Being Moved
The Linear Bill Trap Transmitter is a unique device used in banks and other places where cash is handled in sizable quantities. Baited with currency, the transmitter is hidden beneath the stack of bills in a cash drawer. Removing the "bait" bill from the holding clip transmits a signal which is repeated at 45-second intervals until the bait bill is replaced (the repeat timer can be disabled by cutting an internal jumper). Operating in conjunction with a suitable receiver, this transmitter sends signals which are used to trigger alarms and other security devices, such as video cameras.
- Bill-size case design
- Test/operate bill clip switch
- Test/operate LED
- Transmits immediately and repeats the signal every 45 seconds when "bait" bill is removed
- Standard digital format: 256 selectable codes
- Powered by one 9-volt battery (included)
Completely portable, the Bill Trap Transmitter works even when cash drawers are being moved, if it remains within RF range of the receiver. Each transmission causes the red LED indicator on the transmitter to light, showing that the transmitter is sending a signal and that the battery is in good condition.
Four Decades Of Quality Security Systems
For more than four decades, Linear has been a leader in the development of RF transmitters and receivers for the professional security market. Whatever you need for creating wireless security can be found at Home Controls – panics, door/windows, smokes, PIRs, plus all the receivers and controllers that support them.
- Encoding Technique: 8-position DIP switch provided for code setting
- RF Carrier Frequency: 303.875 MHz
- Current Consumption: 12 mA DC transmitting
- Operating Temperature: Battery limited
- Power: One 9-volt battery (included)
- Dimensions: 2.4(W) x 6.2(H) x 0.9(D) inches (61 x 157 x 23 mm)