Leviton Universal Wall Switch Occupancy Sensor Remote
3-Way Control With Leviton's 1800W Universal Occupancy Sensors
The Leviton Universal Wall Switch Occupancy Sensor Remote is used in conjunction with either of the two 1800W models in Leviton's line of Universal Wall Switch Occupancy Sensors (IPS15 or IPV15). This remote switch works with your other occupancy sensor to provide multi-location control over one light – perfect for stairways and long hallways.
- Provides 3-way control for LED, CFL, incandescent, fluorescent and motor loads
- Auto-Off upon vacancy saves energy and costs
- Coordinates with Leviton's popular line of Decora devices
- Fits in standard wallbox and replaces 3-way wall switch
This remote switch offers the same great features as your original occupancy sensor, including Auto-Off and Manual On control. Your lights will turn on when the sensor's button is pushed, and as long as motion is detected in the area, the lights will stay on. When the room is left vacant and motion is no longer detected, the lights will automatically turn off according to your timer setting. Additionally, the convenient push-button provides manual off control at any time. The sensor covers up to 900 square feet (30 x 30) with a 180-degree field of view, ensuring adequate coverage for even the largest rooms.
Modern, Elegant Appeal
The Occupancy Sensor features an elegant style to complement any decor. Its low-profile design eliminates the "scanning device" look of typical sensors, offering homeowners a modern, yet decorative solution for lighting control. Each sensor comes with a white faceplate attached and two color change kits (Ivory and Light Almond) for seamless integration into any setting.
The sensor includes a time delay setting, which allows you to delay your lights/motor load from automatically switching off for 30 seconds, 5 minutes, 15 minutes or 30 minutes. For example, closet lighting would ideally be set to turn off after 30 seconds, while a bathroom fan may be set to turn off 15 minutes after the space is vacated.
In addition to its built-in timer, the sensor features a segmented lens to provide optimum sensitivity and performance. It is designed with an extensive "minor motion" area where even slight body movements will be detected. To verify detection is active, an LED indicator light flashes when the sensor detects motion.
This relay-based Occupancy Sensor fits in a standard wallbox. It can be used for 120V lighting, and is compatible with both electronic and magnetic ballasts or 1/2 HP loads. The relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts.
- Occupancy Sensor
- (2) Color Change Kits
Available Colors: White faceplate installed. Light Almond and Ivory color change kits included.
Note: Wallplate not included.
Leviton is the smart choice, providing the most comprehensive range of solutions to meet the needs of today's residential, commercial and industrial buildings. Leveraging more than a century of experience, Leviton helps customers create sustainable, intelligent environments through its electrical wiring devices, network and data center connectivity solutions, and lighting energy management systems. From switches and receptacles, to daylight harvesting controls, networking systems, and equipment for charging electric vehicles, Leviton solutions help customers achieve savings in energy, time and cost, all while enhancing safety.
- Switch Type: 3-Way
- Adjustment: Manual
- Sensor Technology: Passive Infrared
- Pattern Degrees: 180
- Coverage Range: 900 Sq. Ft.
- Time Adjustment: 30 seconds to 30 minutes
- Load Rating: 1800W Incand/FL Ballast 600W LED/CFL, 1/2 HP Motor
- Voltage: 120 Volt AC 60 Hz
- Neutral: Requires a neutral (white) wire connection
- Standards and Certifications: CUL/US
- Code Compliance: California Title 24
- Color: White, Ivory, Light Almond