• Home
  • Leviton Evr-Green E30 Charging Station with RFID, 30A, 25' Cable

Leviton Evr-Green E30 Charging Station with RFID, 30A, 25' Cable

SKU: LVEVR30R2C

Usually ships in 3-5 days.

NOTE: This is a heavy/dimensional part; it is not eligible for free shipping.

$1,640.95

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Details

Affordable Electric Car Charging Station with RFID Reader

Charge your electric vehicle with the Leviton Evr-Green E30 Charging Station with RFID, 30A, 25' Cable. This 30-amp Level 2 electric vehicle charger delivers up to 7.2kW of power through its 25-foot long weather resistant cable, and is capable of charging a car five times faster than standard "Level 1" charging stations. A built-in RFID reader allows for instant activation of the charging station by tapping an RFID card against it.

  • EV Charging Station delivers up to 7.2kW to compatible vehicles
  • Meets all Charging Station Standards and Recommended Practices
  • Works with SAE J1772™ production electric vehicles available in North America
  • Status indicator lights for power, charging status and faults
  • Water and extreme temperature resistant for indoor and outdoor use
  • Compatible with Evr-Green EVSE Pedestal System
  • Integrated On/Off switch to minimize standby power
  • RFID reader adds tap-and-go activation when using EVRFI RFID cards

To ensure reliable charging, this Leviton Level 2 EV charger provides an "Auto-Reclosure" feature that restarts charging in the event of a minor fault, reducing the risk of an undercharged battery. An integrated On/Off switch saves energy wasted on standby or idle power consumption. The charging station also includes status indicator lights that alert you to its power status, the charging status, and any faults.

The EVR30-R2C can be configured to communicate with EV charging online networks, allowing for configuration for specific operations, such as limiting charging duration or amount per use or per day. Setup and configuration is made at configtools and transferred to Evr-Green charging stations via USB.

The Leviton Level 2 EV charger includes a mounting bracket that provides a convenient docking location and is compliant with UL requirements (i.e. removable without any tools).

Installation Details

The charging station mounts onto your wall by drilling holes into the Mounting Template. Secure the mounting bracket with included screws and bolts. Place the Charging Station onto the mounting bracket and secure it with the included Torx bolts.

Contents

  • Evr-Green Charging Station
  • Mounting Bracket & Template
  • (2) Torx T30 Bolts
  • (3) 1/4 inch expansion bolts
  • (3) No.8 wood screws
  • (3) Terminal Connectors

NOTE: This EV home charging station does not include a recommended hook for hanging the charge connected cord when not in use.

About Leviton

Leviton is the smart choice, providing the most comprehensive range of solutions to meet the needs of today's residential, commercial and industrial buildings. Leveraging more than a century of experience, Leviton helps customers create sustainable, intelligent environments through its electrical wiring devices, network and data center connectivity solutions, and lighting energy management systems. From switches and receptacles, to daylight harvesting controls, networking systems, and equipment for charging electric vehicles, Leviton solutions help customers achieve savings in energy, time and cost, all while enhancing safety.

Specifications

  • Manufacturer Part #: EVR30-R2C
  • Warranty: 2-Year Limited
  • Card Reader: ISO/IEC 14443 Type A/B RFID For User Authentication
  • Communication: Network Interface: WLAN (optional)
  • Cover Locking Mechanism: Torx Screw to Prevent Unauthorized Access, No Padlock Option

Electrical

  • Amperage: 30A
  • Breaker: 40A
  • Voltage: 208/240 VAC
  • Output Power: 7.2 KW (30A @ 240V), 6.2kW (30A @ 208 V)
  • Phantom/Standby Power: < 7.5 W
  • Short Circuit Current Rating: 20 mA CCID per UL 2231
  • Charging Connector Cord: #8 AWG SAE J1772™ Charge Connector on 25 ft (7.62m) cable
  • Number of Phase / Wire: L1, L2 and Ground, Bottom Feed

Environmental

  • Operational Altitude: Up to 6,500 ft. (2,000 m)
  • Operating Humidity: < 95 % Relative Humidity, Non-Condensing
  • Operating Temperature: -22°F to 122°F (-30°C to 50°C)
  • Charging Cord Operating Temperature: -40°F to 122°F (-40°C to 50°C)

Material

  • Locking Mechanism: Torx Screw to Prevent Unauthorized Access, No Padlock Option
  • Status Indicator: Power Present, Charging, Fault
  • Charge Connector Cord: UL Type EV
  • Enclosure Cover Material: Plastic (PC+PBT)
  • Enclosure Rating: NEMA Type 3R
  • Charge Connector: NEMA Type 3S
  • Dimensions: 12.6 x 10.3 x 4.5 in (320 x 260 x 115 mm), excluding charging cable, mounting plate and cable holder
  • Weight: 5 lbs excluding charging connector and cable

Standards & Certifications

  • CSA C22.2; No. 107.1 Standard Power Conversion Equipment
  • UL 2251 Standard for Plugs, Receptacles and Couplers for Electric Vehicles
  • UL 991 Standard for Tests for Safety-Related Controls Employing Solid-State Devices
  • UL 2231-1 Standard for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits
  • UL 2231-2 Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits
  • UL 1998 Standard for Software in Programmable Components
  • UL 2594 Standard for Electric Vehicle Supply Equipment
  • UL 62 Standard for EV Flexible Cables
  • SAE J1772™ Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler
  • SAE J2953™ Interoperability with Electric Vehicle Supply Equipment
  • NEC Article 625 Electric Vehicle Charging System Equipment
  • FCC Part 15 Federal Communications Commission Part 15 Radio Frequency Devices Class B Residential Use
  • NOM-ANCE Norma Official Mexicana

Downloads