Jasco Z-Wave Plus On/Off Wall Switch, Gen5
Control Wired Light Fixtures & Devices with Z-Wave
The Jasco Z-Wave Plus On/Off Wall Switch (Gen5) enables Z-Wave remote control, as well as local control, for a wired light or appliance. The rocker switch provides On/Off control, and can be included in multiple automation groups or scenes. A blue LED indicator helps guide you to the switch through the dark.
- Works with incandescent, LED, xenon, halogen and fluorescent lighting
- Supports loads up to 960W, 1/2 HP, or 1800W/15A resistive
- Suitable for single-pole or multi-pole applications
- Can be included in multiple groups or scenes
- "Z-Wave Plus" certified for wide compatibility
- Uses a standard decorative-size wallplate (sold separately)
Available Colors: White paddle installed. Light Almond paddle included.
Z-Wave Plus Certification
Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the "Next Gen" Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.
The Z-Wave Plus On/Off Wall Switch works with incandescent, LED, xenon, halogen and fluorescent lighting, as well as any on/off resistive load up to 1800W and motor loads to 1/2 HP. The switch supports single-pole or multi-pole applications, and works in conjunction with up to three aux/remote switches (requires the toggle or rocker-style Jasco Z-Wave Auxiliary Switch, sold separately). This model can also be included in multiple zones/scenes.
The switch requires standard screw terminal installation with wiring connections for Line (Hot), Load, Neutral, and Ground. Multi-pole installation also requires a traveler wire.
NOTE: Requires a Z-Wave network controller. Wallplate not included. Uses standard single-gang wallplate. For indoor use only. The fixture controlled by the switch must not exceed 960 watts (Incandescent); 1800W (15A) Resistive or 1/2 HP Motor. The switch is designed only for use with permanently installed fixtures.
Jasco: Leader And Innovator In Electronics
Established in 1975, Jasco Products is a leader in the design and development of home automation products and wireless accessories. Jasco develops consumer electronic accessories, computer accessories, home electrical products, and personal security and surveillance products. The company is also an active member of the Consumer Electronics Association (CEA).
- Manufacturer Part #: 14318
- Power: 120VAC, 60Hz
- Signal (Frequency): 908.42 MHz (U.S.)
- Protocol: Z-Wave Plus
- Maximum Loads: 960W incandescent, 1/2 HP Motor or 1800W (15A) Resistive
- Wireless Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
- Operating Temperature Range: 32° to 104°F (0° to 40°C)
- Environmental: For indoor use only.
- Approvals: FCC, IC
- Warranty: 2 Year
This device supports lifeline (association group 1). This Z-Wave device has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave enabled controller that supports the Z-Wave Configuration command class. For a complete list of Adjustable Configurations, visit: www.jascoproducts.com/z-waveconfig