HomeSeer Z-Wave Plus Scene-Capable RGB On/Off Wall Switch, 200 Series
Z-Wave On/Off Switch with Smart Home Status Indicator
Add Z-Wave on/off control to a light fixture or wired appliance, PLUS get at-a-glance status reports about your smart home, by installing the HomeSeer Z-Wave Plus Scene-Capable RGB On/Off Wall Switch (200 Series, U.S.). As part of HomeSeer's 200 Series, this wall switch features a multi-colored (RGB) LED, which is programmable to illuminate or flash a certain color according to what you want to know about your home's status.
This switch/scene controller is compatible with most lighting types and various appliances. Once connected to the light/appliance, the switch can be used to turn it on/off locally or through Z-Wave.
- Provides On/Off local and Z-Wave control for a light or appliance
- Supports incandescents up to 900W, CFL/LEDs up to 200W
- Works with motor loads up to 1/2 HP or resistive loads up to 15A
- Features 1 multi-color LED to indicate status of other smart devices
- Multi-tap (up to 5 taps) allows triggering up to 14 scenes/events
- Uses simple screw terminal installation (neutral required)
- Supports single-pole or multi-pole configuration
Z-Wave Controller Compatibility
With Z-Wave Plus certification, the switch is essentially compatible with all major Z-Wave hubs and controllers. However, the special LED RGB and multi-tap features of this switch are only guaranteed to be fully supported by HomeSeer controllers/systems. SmartThings users may also take advantage of these features using a special device handler. If you're using any other brand of controller, these features may be supported but cannot be guaranteed; contact Home Controls or HomeSeer for assistance setting up the LED RGB and multi-tap features.
(Any controller that supports the Z-Wave configuration class may be used to set color options. On HomeSeer systems, simple event actions can be used to set the normal mode color and the individual LED status color and blink.)
Multi-Colored LED Offers Convenient Home Status Reports
The LED on the switch operates in two different modes: normal mode and status mode. Whenever an event within your smart home network (such as an alarm triggering) corresponds to a status event you have programmed into the switch, the LED switches from "normal mode" to "status mode" and illuminates/blinks accordingly. When no status conditions are active, the LED operates in "normal mode."
In "normal mode," the LED glows to reflect the on/off status of each circuit using a palette of 7 possible colors. "Normal mode" colors either can be set once and left, or can be programmed to change every day or on holidays, birthdays, and other special events.
In "status mode," the LED can be controlled to reflect the status of nearly any device that is a part of your smart home network. For example, if the front door is closed and locked, it can glow green. If the door is closed but not locked, it can glow yellow. If the door is open, it can blink red. If no status conditions are active, the LED automatically returns to "normal mode."
Multi-Tap to Trigger Entire Scenes
This Z-Wave switch works as a scene controller, allowing you to trigger up to 14 different automation events/scenes by tapping the rocker switch in various ways. Double-tap for one scene, triple-tap for another (press and hold to dim/brighten), tap four times for yet another scene, and so on up to five taps.
- Tap top or bottom once: turns connected load on/off and can also trigger 2 events
- Press and hold top or bottom: triggers 2 events
- Tap top or bottom 2, 3, 4, or 5 times: triggers up to 8 more different events
For example, you could triple-tap the top of the rocker when you arrive home to trigger a scene that turns on your lights, sets your thermostat, and disarms your security system. Later when you leave home, triple-tap the bottom of the rocker to turn everything off and arm your security system.
The HomeSeer Z-Wave Plus Scene-Capable RGB On/Off Wall Switch supports single-pole or multi-pole applications, and optionally works in conjunction with HS-WA100+ companion switches (sold separately) for 3-way, 4-way and 5-way circuits. This switch can also be included in multiple scenes/zones.
The switch uses screw terminal installation and requires wiring connections for Line (Hot), Load, and Neutral (with option to wire Ground). A traveler wire is required for multi-pole applications. The single-gang switch mounts in an electrical box and uses a standard-size wallplate (sold separately).
Z-Wave Plus Certification
Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the "Next Gen" Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.
- Wall Switch
- User Guide
- Requires a Z-Wave network controller. (When used with a HomeSeer controller/system, requires Z-Wave plug-in v22.214.171.124 or higher.)
- Requires Line, Neutral, and Load wire connections.
- Wallplate not included.
Home Automation For Your Life And Family
HomeSeer can be used to monitor and control lighting, appliances, climate, security, telephones, irrigation, window shades and home entertainment equipment. Then mix and match any combination of interfaces you like to suit the needs of your family. Control the system with your choice of in-wall button controllers, touchscreens, wireless remotes, microphones, mobile devices, standard telephones (voice and touch-tone control), and personal computers.
All HomeSeer home automation systems are web-enabled to allow access to your home while you're away at work or on vacation. Easily keep tabs on your home and family using any web browser from anywhere. Receive emails or calls when things happen at home or people come and go.
Now, with HomeSeer home automation, you can finally have the peace of mind that comes from knowing your family is safe and secure and your home is operating at peak efficiency!
- When used with a HomeSeer controller/system, requires Z-Wave plug-in v126.96.36.199 or higher.
- Manufacturer Part #: HS-WS200+
- Color: White. Almond color kit available (not included).
- Protocol: U.S. Z-Wave Plus (908.42 MHz)
- Power: 120 VAC, 60Hz
- Max. Load:
- Incandescent: 900 Watts
- LED / CFL: 200 Watts
- Motor: 1/2 HP
- Resistive: 1800 Watts (15 Amps)
- Features: Supports Z-Wave S2 security
- Approvals: cUL, FCC, Z-Wave Plus certified