• Home
  • HomeSeer SmartStick+ Z-Wave USB Interface

HomeSeer SmartStick+ Z-Wave USB Interface

Usually ships within 1-2 business days

SKU: HSSMARTSTICK
$39.95

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Z-Wave Interface for Easy Network Setup

Easily add and delete Z-Wave devices to/from your Z-Wave network, even at long distances, using the HomeSeer SmartStick+ Z-Wave USB Interface. The USB stick can be used with any Z-Wave controller with a USB port or a PC with Z-Wave certified home automation software installed. The HomeSeer SmartStick+ Z-Wave USB stick supports Network Wide Inclusion (NWI) and is Z-Wave Plus certified. It not only facilitates network setup, but also provides an easy upgrade path from older Z-Sticks, Z-Trollers, and other Z-Wave interfaces.

  • Simplifies setup of a Z-Wave network
  • "Z-Wave Plus" certified for wide compatibility
  • Supports Network Wide Inclusion for easy pairing
  • Can be used in conjunction with HomeSeer Z-NETs
  • Provides easy upgrade path from other Z-Wave interfaces

Contents

  • SmartStick+ Unit
  • Quickstart Guide

Note: This Z-Wave USB stick requires Linux or Windows 7 (or higher). Not compatible with Windows XP or earlier.

Home Automation For Your Life And Family

HomeSeer can be used to monitor and control lighting, appliances, climate, security, telephones, irrigation, window shades and home entertainment equipment. Then mix and match any combination of interfaces you like to suit the needs of your family. Control the system with your choice of in-wall button controllers, touchscreens, wireless remotes, microphones, mobile devices, standard telephones (voice and touch-tone control), and personal computers.

All HomeSeer home automation systems are web-enabled to allow access to your home while you're away at work or on vacation. Easily keep tabs on your home and family using any web browser from anywhere. Receive emails or calls when things happen at home or people come and go.

Now, with HomeSeer home automation, you can finally have the peace of mind that comes from knowing your family is safe and secure and your home is operating at peak efficiency!

  • Manufacturer Part #: SmartStick+
  • Protocol: Sigma Serial API
  • Chip: Built-in 500 Series Z-Wave Module
  • Frequency: 908.42 MHz (US) Z-Wave
  • Library: ZDK 6.5x Z-Wave Library
  • Firmware: Field-upgradable
  • Compatibility: HomeSeer HS3-based systems running under Linux or Windows 7 (or higher)
  • Requirements:
    • Linux or Windows 7 (or higher)
    • HomeSeer HS3 System
    • Supports 908.42 MHz Z-Wave products
  • Certifications: Z-Wave Plus
  • Warranty: 1 Year