• Home
  • Elk Magic Module Controller

Elk Magic Module Controller

Order now and we'll ship same business day (if ordered before 3 pm PST).

SKU: ELKMM220
$55.95

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Available With 2 Or 4 Inputs/Outputs

The Magic Module MM443 has virtually no limits and can be used as a stand alone field programmable controller in a vast array of applications from timers, door controllers, simple process controllers, etc. or as a networked controller with other modules connected on a common RS-485 data bus. All data bus modules are assigned a device type and up to 31 of each type may interconnected together. A telephone style RJ-11 connector allows an X-10 Power Line Interface to be added for transmitting and receiving signals across the AC power line. This same connector can alternately be used with our Access Interface (MA290) for reading Dallas iButton ID devices or Proximity cards for identification and access control applications.

The Magic Module MM220 is a two digital input, two form C relay output programmable controller. It may be used as a stand alone field programmable controller in a vast array of applications from timers, single zone security system, pulse stretcher, simple process controllers, etc. The MM220 comes factory pre-programmed as a single zone security system and can be re-programmed by using a personal computer. The MM220 program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory).

Premium Products For Security & Automation

Elk Products designs and manufactures quality electronic equipment for the professional security alarm and home automation installer. Our products include siren drivers, speakers, relays, timers, programmable controls, surge suppressors, telephone equipment, amplifiers, recordable units, batteries and more.

Product Features

ELK-MM220

  • Two Digital Inputs
  • Two Relay Outputs (jumper programmable "transistor open collector" output on relay 2)
  • 4096 program bytes using SIMPLE programming language
  • 4 general purpose Counters, range 0 to 255 counts
  • 4 general purpose Timers, range 1/10 second to over 255 hours
  • Program stored in non-volatile EEProm memory
  • Surface Mount ABS Enclosure with Snap-On Cover

ELK-MM443

  • Four analog or digital inputs
  • Four relay outputs (2 relay outputs may be jumper programmed for transistor open collector outputs)
  • 16,384 program bytes using SIMPLE programming language
  • 4 general purpose Counters, range 0 to 255 counts
  • 4 general purpose Timers, range 1/10 second to over 255 hours
  • Networked to optional PC and up to 31 ELK-MM443’s through a RS-485 data bus.
  • X-10 Power Line Carrier Interface. PL513, PSC04 (Transmit Only), or TW523, PSC05 (Two Way).
  • Analog transmission MM443 to MM443 and Preset Dim Commands.
  • Dallas iButton TouchKey Reader with optional ELK-MA100 or ELK-MA290 interface
  • Programs the ELK-MM220 (two inputs, two relay outputs)
  • Emulates ELK-MM220 for code development
  • Program stored in non-volatile EEProm memory
  • Mounts to single or double gang electrical box.
  • Optional DIN Rail Mounting. PCB mounts into 4 inch SnapTrack.

Technical Details

ELK-MM220

  • Inputs: 2 Digital inputs, Jumper programmable for +12v or pull to ground input level. 0 to 2 volts is low, 2 to 15 is Hi.
  • Outputs: 2 Form "C" Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; One relay output may be configured as open collector transistor output – 100 ma. Max.
  • Operating Voltage: 9.5-15 Volts DC
  • Current Draw: 10 ma. Nominal, 70 ma. Maximum with both relays active.
  • Enclosure: Black ABS Plastic: 4.5" x 3" x 1.2"

ELK-MM443

  • Inputs: 4 Analog, 0 to 13.6 volts, with jumper programmable 2k pull up resistor to 12 V, or 2k pull down resistor to ground. May be left floating. Software programmable high and low threshold levels per input for end-of-line resistor circuits. Input impedance (floating input) – 100K ohms
  • Outputs: 4 Form "C" Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; Two relay outputs may be configured as open collector transistor outputs – 100 ma. Max.
  • Operating Voltage: 9.5-15 Volts DC
  • Current Draw: 10 ma. Nominal, 130 ma. Maximum with all relays active.
  • X-10 Interface: PL513, PSC04 or TW523, PSC05 – 4 wire RJ-11 telephone style
  • Data Bus: RS-485, max bus length: 4000 feet w/22 AWG wire
  • Enclosure: White Plastic: 6.5" W x 4.375"H x 2"D