• Home
  • Channel Vision HDMI Modulator, 2 Input

Channel Vision HDMI Modulator, 2 Input

Usually ships within 3-5 business days

SKU: CVHDM200R
$930.00

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Stream 2 HD Sources to Multiple TVs

The Channel Vision HDMI Modulator, 2 Input allows for two HDMI inputs to redirect to virtually any TV or display of your choice. Designed to accommodate long cable runs, this rack-mounted signal modulator translates HDMI signals along coax cables output to deliver lossless, zero latency HD signals across an AV network. Distribute HD content from Satellite, Cable TV PC, Media Players, DVRs, and virtually any other HDMI source.

  • Dual HDMI-to-RF signal modulator transmits HD AV signals to various displays
  • Add an unlimited number of AV outputs into your system using RF connectors
  • Use in AV home theater or surveillance systems
  • Unlimited distance with virtually no latency to each TV by adding in-line RF amplifier
  • Change settings through front panel or via RJ-45 connection from your computer
  • Low Power Consumption: No additional equipment is needed at each TV location
  • Use existing Coax, no need for new wiring

Installation Details

The HDMI Modulator, 2 Input, is powered via a plug-in power supply and must be rack-mounted. Then, connect an audio/video source to the modulator using an HDMI cable. Then, use a coaxial cable to connect the RF Output to your RF network, RF splitter, or a TV set directly. Configure settings and output choice using the front panel or with a computer connected to the modulator via ethernet.

Contents

  • HDMI Modulator, 2 channel
  • Power Supply

Total Package Solution

Channel Vision has been a leading manufacturer of RF video distribution products, structured wiring enclosures and modules, security cameras, high performance audio/video distribution systems since 1993. Channel Vision manufactures a growing list of products designed to make today's homes more convenient, safe, and innovative. Channel Vision Central – structured wire systems, Aria – multi-room audio distribution, and Channel Vision Technology – home-theater and security products, combine to make.

  • Manufacturer Part #: HDM200R
    • Module Rack Mount
    • 1-U brushed aluminum black faceplate
  • HDMI Inputs (2):
    • Video: HDMI 1.4a, HDCP 1.4, 1080p@30fps, 1920×1080 HD
    • Audio: HDMI Stereo MPEG/ AAC/AC3 Dolby
    • Modulation Cable Rating: 64/256 QAM / AIR 8VSB
  • RF Output (2):
    • Power: 35dBmV Cable / 30dBmV Antenna
    • Gain Range: 30dBmV adjustable
    • Frequency: 47-860 MHz
  • Network setup and configuration:
    • Video bitrate: 19mbps
    • Encoding delay: 90~100ms
  • Power Supply:
    • Input Voltage: 100-240VAC, 50/60Hz; 12 VDC / 2amp