Channel Vision A-BUS Audio Distribution Kit, 1 Source, 4 Zones
Multi-Room Audio Distribution System
The Channel Vision 1-Source, 4-Zone A-BUS Kit takes the guess work out of building a whole-house audio system. It provides everything you need except for speakers.
- (4) AB-134 Amplified Keypad
- (1) AB-203 Single Source Module
- (1) AB-404 4-Zone Panel Distribution
- (2) IR-3002 Dual IR Flasher
- (1) A0502 Remote Control
- (1) AB-T2454 Power Supply for AB-404
- (1) J-110 Punch Down Tool
- (4) Single-Gang Decorator Plates included
The AB-124 is an amplified keypad for Channel Vision's single-source and multi-source CAT5 audio systems. It provides convenient volume control and source selection capabilities, while its elegant décorator styling blends seamlessly with other wall switch devices.
The AB-203 is a single source module. 1 per system is required. It interfaces sources to the system. Mount near audio components (CD player, receiver etc.)
The AB-404 is a distribution module. 1 per every 4 amplified keypads is required. All CAT-5 cables terminate here. It also inserts power. Mount in a structured wire panel or screw to a wall. Compatible with panels from Channel Vision Central, OpenHouse, OnQ, or Leviton.
The IR-3002 is a dual head IR flasher. Use one head per source to control from the remote room.
A-BUS Cat 5 Audio
The Channel Vision A-BUS system can distribute high-quality audio to every room in your house over ordinary CAT5 data wire. Power for the entire system is delivered via the same CAT5 cable so only a single run of CAT5 is required. Each pair of speakers is powered and controlled from a local wall plate with a dedicated amplifier for that zone. Volume in that zone can be controlled manually or by an infrared remote. IR signals are also routed back to the source components enabling control of sources and functions from any zone.