• Home
  • 2GIG Hardwire Conversion Kit

2GIG Hardwire Conversion Kit

SKU: LN2GIGTAKEKIT1

Order now and we'll ship same business day (if ordered before 3 pm PST).

$121.00

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Details

Convert Hardwired Security into Wireless

The 2GIG Hardwire Conversion Kit includes all of the essential components you need to upgrade an existing hardwired security system into a 2GIG wireless system. As the main kit component, the 2GIG Super Switch Takeover Module converts up to eight (8) hardwired zones into eight (8) wireless zones that are compatible with the wireless 2GIG GoControl panel (sold separately).

  • Module converts 8 hardwired zones into 8 wireless zones
  • Works with a third-party 12-volt control panel
  • Includes power supply board with battery charging circuit
  • Wall-mount enclosure neatly houses all components
  • Provides extra space for additional Takeover Modules

About the Super Switch Takeover Module

The module connects to a third-party 12-volt control panel and converts signals from your hardwired zones/devices into wireless signals, which are then transmitted to the GoControl panel. The converted zones can then be managed and monitored through your GoControl system.

Additional Kit Components

The kit also includes a Power Supply Board (12/24 VDC) with a backup battery charging circuit, a Grounded Plug-in Transformer, and an ABS plastic enclosure. The enclosure includes a dedicated slot for a backup battery (not included), and also houses up to two (2) additional Super Switch Takeover Modules (three total), allowing you to convert up to 24 hardwired zones into wireless zones.

Contents

  • 2GIG Super Switch Takeover Module (2GIG-TAKE-345)
  • ABS Plastic Enclosure
  • Power Supply Board, 12/24 VDC
  • Grounded Plug-in Transformer
  • Mounting Hardware

Note: Requires a 2GIG GoControl Panel and one 12V, 1.4 AH Rechargeable Sealed Lead Acid Battery (or better), not included.

Innovation Drives 2GIG Technology

Now under Nortek's family of Linear products, 2GIG offers intuitive and creative home technology with its premier self-contained, all-in-one security and home automation system. 2GIG's GoControl system has become a leading control hub for Z-Wave wireless systems, has and won numerous industry awards, including TechHome's 2011 Security Product of the Year and the 2012 Overall Maximum Impact Award at Electronic Security Expo (ESX). With 2GIG in control, users experience technology they never thought possible.

Specifications

  • Manufacturer Part #: 2GIG-TAKE-KIT1
  • Warranty: 1-Year Limited

Enclosure

  • Material and Certification: ABS Plastic UL 94: V-O
  • Dimensions: 11.5 x 12.5 x 4 inches (29.2 x 31.8 x 10.2 cm)

Super Switch Takeover Module (2GIG-TAKE-345)

  • Wireless Signal Range: 350 feet, open air, with 2GIG Wireless Control Panel
  • Code Outputs: For each of 8 serialized zones: Fault; Restore; Tamper; Low Battery
  • Transmitter Frequency: 345.000 MHz (crystal controlled)
  • Transmitter Frequency Tolerance: ±15kHz
  • Transmitter Bandwidth: 24kHz
  • Modulation Type: Amplitude Shift Keying-On/Off Keying (ASK-OOK)
  • Unique ID Codes: Over one million different code combinations
  • Supervisory Interval: 70 minutes
  • Peak Field Strength: Typical 50,000 uV/m at 3m
  • Dimensions: 3.54(L) x 2.56(W) x 1.13(H) inches (9.0 x 6.5 x 2.9 cm)
  • Weight: 2.85 ounces (80.8 g)
  • Housing Material: ABS Plastic
  • Color: White
  • Operating Temperature: 32° to 120° F (0° to 49° C)
  • Relative Humidity: 5 to 95 percent Non-Condensing
  • Operating Voltage: 9-16 VDC, 50mA
  • Certification: ETL, FCC, IC

Power Supply Board

  • Input: 16.5 VAC, 20 VA
  • Output: 12/24 VDC
  • Battery Backup: Built-in charger for sealed lead or gel type batteries, automatic switchover to standby when AC fails
  • Visual Indicators: AC input and DC output LED indicators

Grounded Plug-in Transformer

  • Primary: 120 VAC 60Hz
  • Secondary: 16.5 VAC 50 VA
  • LED Indicator: Supervises power
  • Primary Termination: 2 male blades and grounding pin
  • Secondary Termination: 3 #6-32 screw terminals with washers for secure contact
  • Dimensions: 2.88(W) x 2.25(D) x 3.88(H) inches (7.3 x 5.7 x 9.9 cm)
  • Weight: 1.5 pounds
  • Color: White
  • Surge Protection:
    • 3 Mode Protection: Line, Neutral, and Ground
    • Clamping Voltage: 340 volts
    • Max. Spike Current: 4500 amps
    • Energy Dissipation: 60 joules
    • Max. Spike Voltage: 6000 volts
    • Clamping Response Time: 25 nanoseconds
  • Certification: UL and ULC Listed

Requirements

  • 2GIG GoControl Panel Wireless Security System
  • 12V, 1.4 AH Rechargeable Sealed Lead Acid Battery (or better)

Add-On Components

  • Backup Battery (Required). One (1) 12 V, 1.4 AH Rechargeable Sealed Lead Acid Battery (or better) is required
  • 2GIG-TAKE-345: Super Switch Takeover Module (Optional). Add up to two (2) additional modules in the enclosure
  • Linear H208: Lock Kit (Optional). Recommended for locking the plastic wall-mount enclosure with a key for additional security

Downloads