Leviton Harman/Kardon IR Remote Control Extender Kit - LVHKRMS available from Home Controls

Welcome to Home Controls December 03, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Home Theater & Entertainment • Home Theater Products • Leviton Harman/Kardon IR Remote Control Extender Kit
	Home Theater Products

Leviton Harman/Kardon IR Remote Control Extender Kit
LVHKRMS
PRICE: $84.95
(LVHKRMS) Leviton Harman/Kardon IR Remote Control Extender Kit

QUANTITY:

LEVITON HARMAN/KARDON IR REMOTE CONTROL EXTENDER KIT

INFRARED REMOTE SENSOR KIT

The Leviton Harman/Kardon IR Remote Sensor Kit is conveniently small (about the size of a deck of cards) and can be placed on top of the TV or entertainment center to control audio and video components with a compatible receiver’s remote control. The IR Sensor can connect all Harman/Kardon products together so that one IR Sensor can operate them all.

AUDIO/VIDEO ENTERTAINMENT CENTER COMPONENTS FROM JBL AND HARMAN/KARDON™

There’s no better way to assure the highest performance and value from a state-of-the-art Leviton Architectural Edition™ powered by JBL multi-room music and home theater residential installation than to power it with a matched Harman/Kardon Entertainment Center. For over 50 years, Harman/Kardon has remained one of the most preferred component providers among discerning audio enthusiasts and music lovers. The Harman/Kardon components available through the Leviton Architectural Edition powered by JBL program represent a summary of today’s most advanced audio/video technologies – and are fully compatible with the formats and platforms of the future.

Leviton Harman/Kardon IR Remote Sensor Kit Instruction Sheet (.pdf)
Leviton Harman/Kardon IR Remote Sensor Kit Spec Sheet (.pdf)

Features:

Attractive case for shelf-top locations
Red talkback LED tests system for correct wiring as well as indicating infrared reception
Nominal reception angle: 45 degrees off axis
Attached 7' cable and 3.5 mm stereo mini plug permits direct plug-in to Connecting Block that has an "IR RCVR" or "AUX" jack
Connecting Block connects two emitter ports and power supply to IR Receivers that use a stereo mini plug
For multi-room application, place the IR Remote Sensor in a remote room and use a 1/8-inch cable of up to 100 feet in length to connect the IR Remote Sensor connecting block to the multi-room IR input on the receiver

Specifications:

IR modulation frequency bandwidth: 30- 100 kHz
Nominal reception range: > 30 feet
Power: 12 volts DC @ 10 milliamps. 781RG Power Supply required (supplied)
Maximum cable length: One mile with 18 gauge
Maximum current output: 100 milliamps
Connecting block: 3.5 mm stereo mini jack for quick-connect IR receivers; two 3.5 mm mono mini jacks with 470-Ohm resistors drive 2 single or 2 dual emitters; and, 2.1 mm coaxial power jack