Linear Mid-Range RF Receiver, 1-Channel - LNXR1 available from Home Controls

Welcome to Home Controls December 03, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Security and Property Protection • Linear Wireless Products • Linear Mid-Range RF Receiver, 1-Channel
	Linear Wireless Products

Linear Mid-Range RF Receiver, 1-Channel
LNXR1
PRICE: $184.95
(LNXR1) Linear Mid-Range RF Receiver, 1-Channel

QUANTITY:

Linear 3-ft Mid-range Antenna with 18-ft of Coax
LNANT2
PRICE: $39.95

Linear 12VDC/2Amp Power Supply for XT Series
LNT1224DC
PRICE: $29.95

Linear 7-inch Mid-range Rubber Whip Antenna
LNANT1A
PRICE: $19.95

LINEAR 1-CHANNEL MID-RANGE RECEIVER

WIRELESS THAT GOES THE DISTANCE

The Model LNXR1 1-Channel Mid-range Receiver is designed for use in various wireless remote control applications. When the Model LNXR1 receiver detects a signal from its companion transmitter, it will verify the digital code, activate its output, and trigger the remote device connected to the receiver.

The LNXR1 receiver has full supervision capabilities. If the status option is selected, the receiver expects hourly status signals from its transmitter. If these signals cease, the receiver will indicate trouble by activating its status output after four hours. Contact supervision allows the receiver's output to follow the transmitter's input, staying activated as long as the transmitter input is activated. Alternately, an auto-restore option can be selected in the transmitter, causing a momentary receiver output each time the transmitter input is activated. If the transmitter sends a low battery signal, the receiver's low battery output will activate.

Power for the LNXR1 receiver can come from an external regulated 12 VDC power supply (Linear Model T-1224DC) or from a 12-volt battery. A diode protects the unit from reverse power polarity. The XR-1 draws about 30 mA standby, and about 70 mA when the output is active. The receiver output provides isolated N/O and N/C relay contacts capable of switching a maximum of 1 Amp @ 32 VDC. The low battery and status outputs are solid state and are capable of switching up to 50 mA @ 20 VDC to ground.

LINEAR'S XTENDED RANGE GETS YOU THERE

Linear’s Xtended Range wireless receivers and transmitters are more than twice as powerful, 6 times more sensitive, and 3 times more immune to interference than the next best mid-range wireless equipment. Linear once offered the industry’s top range at 5 miles, now with this new technology, they go to 10 miles. Maybe 15!

Linear 1-Channel Mid-range Receiver Data Sheet (.pdf)

Up to 10 Miles of Line-of-Sight Range (with XT-1 and XT-4)
Up to Two Miles of Line-of-Sight with Handheld Devices
Superheterodyne Receiver Technology
Over 64,000 Codes
Form "C" Alarm Output
Weather-Resistant Case
Power On and RF Activity Indicators
Optional RF Supervision
RF frequency: 27.255 MHz
4.25" W x 6.25" H x 2.5" D