Linear Supervised DXS Format RF Receiver - LNDXSR150 available from Home Controls

Welcome to Home Controls December 03, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Security and Property Protection • Linear Wireless Products • Linear Supervised DXS Format RF Receiver
	Linear Wireless Products

Linear Supervised DXS Format RF Receiver
LNDXSR150
PRICE: $59.95
(LNDXSR150) Linear Supervised DXS Format RF Receiver

QTY:

Linear Supervised PIR Motion Detector Transmitter
LNDXS54
PRICE: $74.95

Linear Keychain Transmitter
LNDXT4
PRICE: $39.95

Linear Handheld Transmitter
LNDXT2
PRICE: $34.95

LINEAR SUPERVISED RECEIVER

4 or 8 CHANNEL

The Model DXSR-1504 Supervised 4-Channel Receiver is a four channel supervised digital receiver with solid state outputs designed for use with Linear's DX and DXS Format transmitters. This receiver can be used in a variety of security and remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate channel output activates. The channel outputs have three optional configurations; momentary, toggle on/off, and latch until restored. Status and low battery outputs are for supervisory indications. Cutting jumpers select which channels require supervisory status reports from transmitters.

The Model DXSR-1504 incorporates a dual high-sensitivity superheterodyne diversity receiver with two whip antennas. This type of receiver provides superior performance by preventing loss of signal due to multi-path interference.

The Model DXSR-1508 Supervised 8-Channel Receiver is a eight channel supervised digital receiver with solid state outputs designed for use with Linear's DX and DXS Format transmitters. This receiver can be used in a variety of security and remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate channel output activates. The channel outputs have three optional configurations; momentary, toggle on/off, and latch until restored. Status and low battery outputs are for supervisory indications. Cutting jumpers select which channels require supervisory status reports from transmitters.

The DXSR incorporates a dual high-sensitivity superheterodyne diversity receiver with two whip antennas. This type of receiver provides superior performance by preventing loss of signal due to multi-path interference.

In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices. The receiver should be mounted indoors or inside a weather resistant non-metallic housing for outdoor use.

The digital DX/DXS code format features over a million possible codes. The transmitters are precoded at the factory to unique codes, so no field coding is required. For versatility, any transmitter can be programmed into any receiver channel. Receivers must be programmed to recognize the transmitter's code before system testing and operation. Up to 32 transmitters can be programmed into the receiver. Each button on multi-button portable transmitters send a unique code, and are programmed as separate transmitters.

The CHANNEL display shows the channels activated and the presence of radio activity. Individual indicators for ALARM, STATUS, and LOW BATT show the supervisory status of each receiver channel. All outputs can be configured for normally open or normally closed.

Linear Supervised DXS Format RF Receiver Installation Guide (.pdf)

Requires PA12V5CN power supply.