Wilson Electronics Wireless Cellular Building Amplifier, 60 dB

Welcome to Home Controls December 03, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • New Products • New Telephones & Intercoms • Wilson Electronics Wireless Cellular Building Amplifier, 60 dB
	New Telephones & Intercoms

Wilson Electronics Wireless Cellular Building Amplifier, 60 dB
WI801106
PRICE: $649.95
(WI801106) Wilson Electronics Wireless Cellular Building Amplifier, 60 dB

(WI801106) Wilson Electronics Wireless Cellular Building Amplifier, 60 dB

QUANTITY:

Wilson Electronics Dual Band Panel Antenna w/ Wall Mount
WI301135
PRICE: $64.95

Wilson Electronics Dual Band Dome Antenna - Dual Polarized
WI301123
PRICE: $49.95

Wilson Electronics Coaxial Extension Cable, Ultra Low Loss
WI9511
PRICE: $39.95

WILSON ELECTRONICS 60 dB WIRELESS CELLULAR BUILDING AMPLIFIER

60 dB WIRELESS CELLULAR 824-894 MHz SMART TECHNOLOGY BUILDING AMPLIFIER

The Wilson Electronics 60dB Wireless Cellular Building Amplifier is a small, portable, bi-directional device that delivers service levels consistent with what would be expected in areas of high cell network coverage.

When using the Wilson Electronics Cellular Building Amplifier in conjunction with Wilson Electronics antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.

A LEADER IN THE WIRELESS COMMUNICATIONS INDUSTRY FOR OVER 40 YEARS!

Wilson Electronics designs and manufactures a wide variety of cellular signal amplifiers, antennas and related components that significantly improve cellular signal reception and transmission in home, building and mobile applications. Manufactured and supported in the USA, all Wilson products are designed and tested to the highest quality standards possible. Dedication to quality control, performance and product support are reasons why Wilson produces the best performing cellular amplifiers and antennas.

Check out these additional products:

Wilson Electronics In-Building Wireless PCS Amplifier
Wilson Electronics Yagi Cellular Antenna

Wilson Electronics 60dB Wireless Cellular Building Amplifier Installation Guide (.pdf)

Features:

Works with all generations of CDMA, TDMA, GSM and high-speed data technologies
Improves data communication rates needed for 3G technologies.
Automatic gain control up to 60 dB
2 dB gain step 30-60 dB
Power control logic ensures maximum output power is within cellular standards
Gain indicator lights
Automatic shutdown on overload
FCC and IC type accepted

Specifications:

Frequency: 824-849 MHz, 869-894 MHz
Gain: 60 dB
Max Output Power: up to 3 watts
Max RF: + 30 dBm / + 30 dBm
Noise Figure: 3 dB nominal
Flatness: ± 2.5 dB
Isolation: > 90 dB
Power Requirements: 120 V AC 3 A max
Connectors: N-Female 50 ohms
Dimensions: 5.6 x 3.6 x 1.7(inches) / 14.2 x 9.1 x 4.4 (cm)
Weight: 1.5 lbs / 0.7 kg