| |
|
BELOW COST!
Priced to move!
GE SECURITY MICRO MULTIPURPOSE PANIC BUTTON
WEAR ON YOUR WRIST, PENDANT, CLIP, OR MOUNT ON A WALL!
The Water Resistant Personal Help Button is a wireless device used to activate police, medical or auxiliary alarms throughout the premises.
When the help button is pressed, an alarm signal is transmitted and a red LED flashes. Each transmitted signal also includes a battery status signal.
The button has five adapters which easily fit onto the panic button. Using these adapters the panic button can be mounted on the wall, worn as a belt clip, as a watch, or as a pendant.
LIVE INDEPENDENTLY WITHOUT FEELING ALONE
Whether you're concerned about your own safety or the well-being of a loved one, you can relax because your personal CareGard is always on duty. All it takes is the push of a button and an emergency response operator is on the line, ready to summon whatever help you need.
CareGard is on call 24 hours a day, 365 days a year. You continue enjoying a rich, independent lifestyle. Yet you're never alone because CareGard is a constant presence, always looking out for you.
Check out these additional products:
GE Security Panic Switch w/Terminals, Surface Mount
GE NetworX 4-Button Wireless Key Fob

Water Resistant Personal Help Button Installation Guide (.pdf)
- RF Frequency: 319.5 MHz
- Compatibility: 60-906-95 – All GE Security 319.5 MHz Control
- Panels/Receivers; 600-1011-95R – All GE Security 319.5 MHz
- SAW Control Panels/Receivers
- Battery Type: 3.0V DC Lithium
- Recommended Battery: Duracell (DL2032); Panasonic or Varta
(CR2032)
- Typical Standby Current (μA): < 1
- Estimated Battery Life (at 20° C): 4 years
- Supervisory Interval: 64 minutes
- Typical RF Output Power: .25 mW
- Operating Temperature Range: 32° to 120°F (0° to 49°C)
- Storage Temperature Range: -30° to 140°F (-34° to 60°C)
- Relative Humidity: 5 – 90%, non-condensing
- Dimensions: 1.5" x 1.3" x .5" (L x W x D)
|