Dakota Alert Wireless PIR Motion Sensor Kit - DAIRWR3000 available from Home Controls

Welcome to Home Controls December 03, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Security and Property Protection • Motion, Flood & Other Sensors • Motion Sensors • Dakota Alert Wireless PIR Motion Sensor Kit
	Motion Sensors

Dakota Alert Wireless PIR Motion Sensor Kit
DAIRWR3000
PRICE: $139.95
(DAIRWR3000) Dakota Alert Wireless PIR Motion Sensor Kit

QUANTITY:

HAI OmniPro II Controller with Enclosure
HA20A002
PRICE: $1,317.50

M1G Gold Controller, Base Unit
ELKM1G
PRICE: $481.95

Seco-Larm, Voice Dialer, 2-Channel, 4 Phone Numbers
SEE920A
PRICE: $104.95

DAKOTA ALERT WIRELESS PIR SENSOR KIT

INCLUDES SENSOR AND RECEIVER

The passive infrared detector is able to monitor an area up to 100° wide. With the integral mask, the detection area can be narrowed down to 20° or anywhere in between. With the swivel mount, the DAIR3000 sensor can be adjusted right to left up to 80° and up and down up to 50°. With three different sensitivity settings, the DAIR3000 can detect a person up to 12 feet, 25 feet or 40 feet away. The sensor can also be set to flash an LED or stay dark when a signal is sent. The DAIR3000 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery. The DAIR3000 is designed for indoor or light duty outdoor applications under an eave or awning or other protected location

The receiver plugs into a standard wall outlet and can be placed on a table or ounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The receiver is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.

WIRELESS ALARMS AND SECURITY EQUIPMENT

Dakota Alert has been distributing and manufacturing driveway alarms for over 20 years. They have the experience necessary to meet your needs. Dakota Alert's product lines include wireless motion drive alerts, wireless rubber hose drive alerts, vehicle sensors, and much more.

Check out these additional products:

Dakota Alert Wireless Driveway Motion Alert
Dakota Alert Wireless Probe Driveway Alert, 4 Relay

Dakota Alert Wireless PIR (.pdf)

Dakota Alert Wireless Receiver (.pdf)

Transmitter:

Monitor 20° to 100°
Three sensitivity settings
Set LED to alert
Frequency: 433.92 MHz
Operating range: -30°F to 110°F
Power: (1) 9V Battery, not included
Battery life: 6-12 months, Low-battery alert
Indoor use, or light outdoor

Receiver:

4 different tones: (Classical , Westminster Chime, Ding Dong, Whistle)
Equipped with 4 form “C” relays
Frequency: 433.92 MHz
Operating voltage: 12VDC
12 volt DC output current: 400 mA maximum
Relay output rating: 24VDC at 3 Amp