| |
Dakota Alert Hard-wired Vehicle Sensor Kit w/Cable
DAVS
PRICE: $174.95
|
 |
|
|
DAKOTA ALERT HARD WIRED VEHICLE SENSOR
AVAILABLE WITH 50' OR 125' CABLE LENGTH
The hard wired vehicle sensor lets you know any time a vehicle
enters or leaves the driveway. The probe of the vehicle
sensor detects metal objects, such as moving cars, in a ten
to twelve foot radius of the sensor.
The vehicle sensor probe should be buried parallel to or
under the driveway. Then the direct burial wire is run back
to the control box that is located in the house. The
probe will detect vehicles moving by and send a
signal through the line to the control box, which
will sound a whistle. The probe and wire can easily
be buried in turf with a shovel or a lawn edger.
If the probe is to be buried in the middle of the
drive, it is best to have the probe and wire in a conduit
to protect it from any damage caused by heavy
vehicles. If there are gophers, moles, etc., in the area, it would be best to have the entire
length of wire in a conduit.
The control box simply plugs into a 110-volt outlet, and has an on/off switch on the top
of the box. There is a set of contacts to connect the two wires from the probe, as well as a
set of 12-volt DC (500mA max) contacts. The voltage output can be used to operate sirens,
bells, or a light timer. Everything is color coded and labeled for easy reference. The whistle
and the voltage output are adjustable for 2, 4 or 8 seconds. The control box can run up
to three probes, and has a sensitivity control so that it can be custom tuned to each application.
WIRELESS ALARMS AND SECURITY EQUIPMENT
Dakota Alert has been distributing and manufacturing driveway alarms for over 20 years. They have the experience necessary to meet your needs. Dakota Alert's product lines include wireless motion drive alerts, wireless rubber hose drive alerts, vehicle sensors, and much more.
Check out these additional products:
Dakota Alert Wireless Driveway Motion Alert
Dakota Alert Wireless Probe Driveway Alert, 4 Relay

|