Macro Module for X10, 42 Macros with IR Control - MIMM42IR available from Home Controls

Welcome to Home Controls December 03, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Manufacturers • Monterey Instruments • Macro Module for X10, 42 Macros with IR Control
	Monterey Instruments

Macro Module for X10, 42 Macros with IR Control
MIMM42IR
PRICE: $64.95
(MIMM42IR) Macro Module for X10, 42 Macros with IR Control

QUANTITY:

Macro Module for X10, 16 Macros
MIMM16
PRICE: $54.95

X10 MACRO MODULE FOR X10

NOW WITH INFRARED CONTROL AND TIMER OPTION!

Control and entire sequence of X10 events with the touch of a button. A single touch will dim the lights, close the drapes, put on soft music and start the Jacuzzi. No computer is required. One of our hottest sellers.

Macro Module allows you to do a macro (i.e. sequence) of X10 events based on a single X10 button press. For example, assign X10 code B1 ON as your Home Theater macro. Enter the macro commands you want for Home Theater viewing and save them. Whenever you press B1 ON, Macro Module will set up the lights for theater viewing. Programming is easy. Each macro can contain up to 48 X10 commands. Program your own, like mood lighting, movie time, romance, TV lighting, end of day and lots more. Detects and corrects bad X10 signal transmissions. Non-volatile memory holds your programmed macro in the event of power failure.

NOTE: Requires XPPSC05 two-way powerline interface.

SIMPLE COST-EFFECTIVE CONTROL WITH X10

X10 Pro manufactures home automation products using X10 powerline carrier and wireless technologies. Have complete automated control of lights and appliances from anywhere in your home with X10 Pro.

Great product for Independent Living!

Check out these additional products:

Macro Module for X10, 16 Macros
Wireless Remote Control System

Macro Module Install Manual and Specs (.pdf)

STORAGE FOR UP TO 42 X-10 MACROS
LEARNS UP TO 27 INFRARED CODES FROM MOST HOUSEHOLD REMOTE CONTROLLERS
UP TO 32 TIMERS CAN BE PROGRAMMED TO SEND AN X-10 CODE FROM 2 MIN. TO 8.5 HOURS AFTER TIMER HAS BEEN INITIATED
X-10 TRANSMISSION DETECT, CONFIRM AND RETRY
NON-VOLATILE MEMORY, X-10 CODES WITHIN MACRO ARE NOT LOST DURING POWER FAILURE