Welcome to Home Controls December 03, 2008 Specials | New Products | Lighting & Appliance Control | Home Controllers | Security Products | Video Cameras | Telephones & Intercoms Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

Home • Products • Environmental Controls • Irrigation Control & Weather Stations • Relay8net 8-Circuit Relay Module, RS232 or USB Irrigation Control & Weather Stations   Relay8net 8-Circuit Relay Module, RS232 or USB WG30062 PRICE: $149.95 QUANTITY:   RELAY8NET RS232 (OR USB) DRIVEN, 8 CIRCUIT RELAY MODULE CONNECTS TO THE RAIN8 NETWORK! For control applications demanding isolated, dry contacts, and the degree of certainty of operation that can come with only with a hard wired system. The Relay8net responds to the same simple 3 byte command as it's irrigation brother, the Rain8net and may be connect to any Rain8 network and assigned any one of 250 possible addresses. Possible commands include: Turn on or off each relay individually Turn off all relays on a specific module Turn off all relays on all modules Get the current status of all relays Optional momentary mode from 1 second to 250 minute Up to 1000' between Relay8net and computer Rain8 The Rain8net is a modular 8-zone sprinkler controller module that can be controlled over the Internet by any computer. It is capable of driving standard 24VAC irrigation valves directly. Additional modules may be daisy chained to provide control and 24 VAC power to as many as 2040 irrigation zones from a single COM or USB port. There is a single RS232 connection between the controlling computer and the "master" Rain8. The distance between the computer and the controller is up to 1000' and requires only 3 wires: TX, RX and GND. The 24VAC power and network communications are transferred from master to slave-to-slave etc. The network connection for the slave units is an 8 conductor RJ45. Each slave has a pair of these modular jacks to pass on data and power to the next one in a daisy chain. Each slave also has a RS232 connection that is used only to assign the address during the initial configuration. Check out these additional products: WGL Rain8 UPB Sprinkler Controller, 8-2000 Valves Rain8net Computer Sprinkler Controller, Master Relay Specifications: Each of the 8 independent relays is equipped with a form C contact that is brought out to two plug in, detachable terminal strips. 1A @24VDC resistive 1A @120VAC resistive Relay contacts are designed for low current applications as well as power switching.

About HCI | Home Automation FAQ's | Shipping Policy | Return Policy | Contact Us | Site Help | Sitemap © Copyright 2008, Home Controls Inc. All Rights Reserved ph. (800) 266-8765

Powered by