| |
Foard Systems X10 to UPB Compact Bridge
FS100011003
PRICE: $119.95
|
 |
|
|
FOARD SYSTEMS X10 TO UPB COMPACT BRIDGE CONTROLLER
STANDALONE BRIDGE CONTROLLER FOR MIXED X10 AND UPB INSTALLATION
The FSD X10/UPB Compact Bridge provides a flexible and inexpensive means to support a two-protocol HA installation. It supports X10 (with extended command capability, including variations from different manufacturers) and UPB devices. The compact bridge controller can be used stand-alone to integrate devices in a mixed X10 and UPB installation, or with a legacy X10 controller.
Input and output commands to/from the X10, UPB, and FGI devices can be mapped across to the other protocols; for example, an X10 switch or a low voltage hardwired switch could be mapped to send a UPB link command to control UPB devices, and a UPB command could be used to control an X10 device, X10 scene, or hardwired relay device. If used with a legacy X10 controller, input and output commands to/from the UPB and FGI devices can be mapped to X10 commands to the legacy X10 controller, via the legacy controller TW523 or PL513 X10 interface.
The Compact Controller also includes a flexible macro programming capability, and interval timer support.
FOARD SYSTEMS BRIDGES THE GAP!
Foard Systems is working hard to provide dedicated device types such as temperature and humidity sensor devices, relay output, and power control devices. Foard Systems provides an easy-to-use, effective, reliable low cost means for interconnecting remote sensor and control devices. With these systems, many devices can be implemented, containing a mixture of various sensor and control device types.
Check out these additional products:
UPB/X10 Bridge Controller
Foard Systems UPB Compact Controller

FSD X10/UPB Compact Bridge Controller Spec. Sheet (.pdf)
- Inputs:
- Host computer loads through RS-232 UPB port
- RJ-11 input from legacy HA controller - Emulates TW523 or PL513 X10 Interface
- 9 VAC, 100ma
- Outputs:
- RJ-11 connection to TW523, PSC05, or PL513 X10 Interface
- RS-232 connection to Serial - UPB Powerline Interface Module
- Dimensions:
- Bridge: 5” x 3” x 1”
- Included with the Compact Bridge:
- Automator Software Suite
- 9 VAC Power Transformer
- X10 Interface (RJ11) Cable
|