HAI Touchscreen Hub, Board Only - HA32A321 available from Home Controls

Welcome to Home Controls November 21, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Security and Property Protection • Complete Security Systems • HAI OMNI Accessories • HAI Video Encoder for OmniTouch With Video
	HAI OMNI Accessories

HAI Video Encoder for OmniTouch With Video
HA32A321
PRICE: $467.50
(HA32A321) HAI Video Encoder for OmniTouch With Video

QUANTITY:

RG59 Cable with 18/2 Carrier Wire 500Ft
WR182RG5905
PRICE: $154.95

Coax Cable Installation Kit
PL90123
PRICE: $119.95

HAI OMNITOUCH VIDEO ENCODER

AFTERMARKET VIDEO ENCODER FOR OMNITOUCH WITH VIDEO

The Video Encoder mounts on the Touchscreen Hub. It digitizes video signals from the cameras to send to the OmniTouch with Video. A video encoder is required for an OmniTouch with Video.

It may be purchased bundled with the Touchscreen Hub and Power Supply (HA32A303 / HA32A304) or be added later if desired.

COMPUTER AUTOMATION CONTROL BY HAI OMNI SYSTEMS

OmniTouch with Video has all of the features of the award-winning OmniTouch, plus the ability to see digital video of up to 6 cameras. The video capabilities complement HAI’s complete home control systems. OmniTouch with Video can control lights, security, macros, temperatures, multi-room audio and video cameras via easy-to-recognize icons, making it extremely versatile and unmatched for high performance at its low price.

Check out these additional products:

HAI Touchscreen Hub, No Video Encoder in Enclosure
HAI Touchscreen Hub, No Video Encoder Structured Mount

HAI Video Encoder Instructions (.pdf)

Connections for 8 touchscreens: Cat 5 (RJ-45) for OmniTouch with Video, 4 conductor for OmniTouch
Inputs from 6 NTSC Composite color or b/w cameras
Pass-through outputs for 6 cameras to TV, modulator, media center, other displays, etc.
Power supply with battery back up for touchscreens (24 V at XX A)
Power supply with battery back up for cameras (12 V at 1.5 A)
Connections for all Omni and Lumina controllers (console bus and ground, 3 wires)
Supports Video Encoder (mounts on Hub circuit board), required for OmniTouch with Video.
Supervisory output can be connected to Omni zone to indicate low battery
Connectors for two sealed batteries, 12 V at 4 to 8 amp-hours each (not supplied)
Supplied with Universal Switching Power Pack, 100-240 VAC, 50/60 Hz.