| |
|
HAI REMOTE INDOOR TEMPERATURE SENSOR, SURFACE MOUNT
CONNECT UP TO 4 REMOTE SENSORS TO AN HAI THERMOSTAT!
The Surface Mount Remote Indoor Temperature Sensor can be mounted in the conditioned space where temperature is being monitored and the controlling thermostat can be mounted elsewhere for protection from tampering or aesthetic reasons. This sensor uses twisted pair, shielded cable from the Omnistat thermostat to its location. This small (2 W X 1.5 H X I D inches) unit is mounted on the surface of the wall.
For distances up to 100 feet, typical twisted pair, PVC-insulated, shielded cable may be used. For distances from 100-150 feet, twisted pair with polypropylene insulated conductors, shielded must be used. For distances from 150-250 feet, twisted pair with foam-polyethylene insulated conductors, shielded must be used. Wire runs must not exceed 250 feet.
The Remote Sensor must be mounted in the same location appropriate for a thermostat for best performance (for example, on an inside wall, free of draft from vents, away from sunlight, windows, etc.).
This sensor will work with any Omni family or Lumina family home control system.
KEEP YOUR HOME COMFORTABLE AND SAVE MONEY
You can keep your home comfortable while managing your energy bill using the HAI Omnistat line of programmable communicating thermostats and temperature sensors. Your HAI home control system can turn off lights, water heaters and pumps when the house is unoccupied. HAI offers temperature and humidity sensors that can be used for temperature based programming of events. The temperature can be used to activate programs for controlling temperatures in attics, garages, greenhouses, basements, wine cellars, or coolers.
Check out these additional products:
HAI Remote Indoor Temperature Sensor, Flush Mount
Thermostat, 1 Cool/2 Heat (Heat Pump), Backlit

Remote Indoor Temperature Sensor Manual (.pdf)
|