WGL Designs RF Whole House Transceiver - WGV572A available from Home Controls

Welcome to Home Controls November 21, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Lighting & Appliance Control • Wall Switches and Dimming • X10 Devices • WGL Designs RF Whole House Transceiver
	X10 Devices

WGL Designs RF Whole House Transceiver
WGV572A
PRICE: $74.95
(WGV572A) WGL Designs RF Whole House Transceiver

QUANTITY:

Relay8 X10 Eight Circuit Relay Module
WG30060
PRICE: $149.95

Rain8II X10 Eight Zone Sprinkler Controller, Two Way
WG30006
PRICE: $129.95

WGL DESIGNS RF WHOLE HOUSE TRANSCEIVER

NO MORE MISSED X10 RF SIGNALS!

Looking for a high quality alternative to X10’s TM751 or RR501? Our WGV572A RF transceiver provides a professional alternative that not only receives all 16 house codes, but also provides greater reception range and more custom control. Because the WGV572A receives all 16 house codes, you can replace 16 normal TM751 transceivers with a single WGV572A!

HOW IT WORKS

An internal 310Mhz receiver detects incoming RF signals generated by X10 compatible remote devices: palm pad remotes, key chain remotes, HawkEye motion detectors, and many others. These signals are filtered by an optional user defined list of allowed house and unit codes. The enabled signals are sent to a XPPSC05 power line interface module, which then broadcasts the X10 commands down the power line to receiving modules (X10 light switch modules, lamp modules, appliance modules, etc.).

Check out these additional products

Relay8 X10 Relay Module
Controller Accessories

WGV572A Transceiver Install Manual

WGV572A RF Transceiver Software Download (.exe)

Receives all 256 house/unit code addresses
Optional external antenna package for extended range
Custom house & unit code filtering via configuration program
Filtering settings are not lost during power loss
Volltage 7 - 12v DC 120v AC to 9v DC, 60hz wall mounted supply included
Receiver Frequency 310mhz Receiver Range
House/Unit Codes and Supported Commands: All 256 addresses, basic commands (On, Off, Bright, Dim, All Lights On, All Off)
Connections Power 3.5 mm plug (center +)
RS-232 for connection with PC to configure house code/unit code filtering (cable included) DB9 female DTE pinout TD, RD, & SG
Power Line Interface XPPSC05 not included (cable included) RJ11
Antenna (V572A version only) male F connector