| |
Hotlink Pro X12
MCHLPROX12
PRICE: $149.95
|
 |
|
|
TURBOCHARGE YOUR REMOTE!
HOTLINK PRO X12
Power up your remote control with the Hotlink Pro X12! Get super power response from your home theater! Hotlink Pro's super sensitive eye hides inside your equipment cabinet or A/V room and it repeats remote IR commands to your home theater system - even behind closed cabinet doors!
Attaching Hotlink Pro X12 to your home theater will give you effortless operation of your equipment without opening the cabinet doors.
Hotlink Pro X12 "sees" the signals from your remote control through a patented, highly sensitive electronic eye. Hotlink Pro then sends those signals to twelve separate audio and video components. Installation is a breeze with Hotlink Pro. There are no complex hookups, nothing attaches to your remote, and there are no batteries to replace. Simply attach the individual emitters to the equipment's IR eye, or receiver, and place the Hotlink Pro eye almost anywhere on the equipment cabinet, in the toe-kick, in a door slot, behind a speaker grill, or even behind the cabinet. Hotlink Pro X12 amplifies IR beams from almost all remote controls.

Hotlink Pro X12 ships complete with a 12 VDC power supply. Power supply has 6 foot cord attached (power supply not shown in picture).
Main Repeater Box is 1 inch high, 2 inches wide and 3 inches long.
Two sets of 8 foot ribbon cables, each with 6 emitters, are connected to the main Repeater Box. Ribbon cable peels apart to allow up to 16 feet of distance between emitters.
There is a blue confirmation LED attached to one of the ribbon cables that blinks when IR is detected.
Clear double-stick tape is reusable if surfaces stay clean and will not harm plastics.
Eye is a 7/32 inch diameter, 1-1/4 inch long brass tube with a side viewing window on a 3-foot cable that allows mounting in cabinet door slots, and comes with velcro tabs and a black screw-down tab for mounting.
|