RCS Communicating Thermostat RS485 - RCTR16485 available from Home Controls

Welcome to Home Controls November 21, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Manufacturers • RCS • RCS Communicating Thermostat RS485
	RCS

RCS Communicating Thermostat RS485
RCTR16485
PRICE: $249.95
(RCTR16485) RCS Communicating Thermostat RS485

QUANTITY:

RCS COMMUNICATING THERMOSTAT RS485

EASY INSTALLATION...NO NEW WIRES TO RUN!

NEW! Now with dual Setpoints (separate Heat and Cool)

The TR16 Thermostat is a two-part product, consisting of a Wall Display Unit (WDU) and an HVAC Control Unit. This design makes installation fast and easy. NO NEW WIRES to run to the wall mounted display unit.

WDU: The WDU is the typical thermostat user interface and mounts in the usual thermostat location. It includes a large, easy to read, digital LCD display with continuous backlight, control buttons and temperature sensor.

The WDU also has on-screen setup of sensor calibration, F or C mode, and network address. Includes optional remote sensor terminals.

HVAC Control Unit: The Control Unit is mounted at the HVAC system and allows connection to the communications network in a convenient location without running new wires out to the wall unit.

THE STAT FOR ALL STANDARDS

Fully interactive with RCS CommStar control units, Stargate, AMX, Crestron, HomeSeer, HAL, Premise Systems, HomeVision and many others!

RCS Communicating thermostats include X10, Serial RS-485 and LonWorks compatible communications products. These universal models work with Standard (Gas forced Air), Heatpump, Hydronic and Radiant heating and cooling systems. Supports newer Multi-stage equipment with up to 3 stages of heating and 2 stages of cooling.

The RCS communicating thermostats function as stand alone thermostat subsystems with communications to allow remote data acquisition and control of the units. All thermostat functions can be monitored or controlled via network commands. The only thermostat family that makes retrofit installation a snap. No new wires needed to run out to the thermostat wall location. Unique, industry leading two part design places the thermostat control unit at the mechanical system and a wall display unit at the thermostat on wall location. Uses only four wires to interconnect the two units.

Check out these additional products:

RCS Zwave Compatible Thermostat WDU
RCS Communicating Thermostat with Graphical Display RS485

RCS Communicating Thermostat Data Sheet (.pdf)

HVAC Systems Compatibility:

Works with standard Gas/Electric or Heat Pump HVAC systems
2-stage Heating, 2-stage Cooling for Gas/Electric systems
3-stage Heating, 2-stage Cooling for Heat Pump systems
Fan selection for fan w/heat operation
Heat Pump Changeover selectable for Heat or Cool operation
Fuse protected relay outputs to the mechanical systems

Features:

Large, easy to read backlit LCD display
Separate Heat and Cool Setpoints
F/C degree temperature display mode
For use with up to 3 Stage Heat, 2 Stage Cool systems
Remote control of all functions via RS-485 remote interface
4x7 Day Setback Schedule under network control
Two part design
Backlit LCD Wall Display Unit
Replaces existing 4 or more wire thermostats without the need for additional wiring
Optional Remote Temperature Sensor

Specifications:

Serial Interface: RS-485, 9600 N81, half-duplex, ASCII based freeform character strings
Power: TCU requires 12VDC, 200mA max (included)
Dimensions WDU: 5"H x 3-1/8"W x 7/8"D
Dimensions TCU: 7-1/2"W x 5-3/4"H x 1-1/2"D