| |
|
LEVITON OCCUPANCY SENSOR SWITCH WITH LED NIGHT LIGHT
OCCUPANCY AND VACANCY SENSING WITH "GUIDE LIGHT" FUNCTIONALITY
The Leviton Occupancy Sensor Wall Switch with LED Night Light is designed to provide occupancy detection with a Guide Light/Night Light all in one clean, attractive wall switch device. The NightLight automatically illuminates based on the ambient level of light present in the space providing a comfortable, low level of light that helps guide the occupant without activating general lighting. It operates separately from the lighting load controlled by the occupancy sensor.
The passive infrared (PIR) sensor detects motion from a heat emitting source within its field-of-view to manually switch lights ON and automatically switch lights OFF. This Occupancy Sensor has the ability to reduce (dim) and turn off the luminance of the “Guide Light” function with a simple dial setting. The LED NightLight consumes less than one half of a watt providing energy savings and guide lighting when room lights are off.
Available in Almond, Gray, Ivory, Light Almond, or White
LEVITON LIGHTING CONTROLS
Leviton offers a wide variety of lighting controls that combine sophisticated design with state-of-the-art technology. These include dimmers, scene controllers, timers, motion sensors, and occupancy sensors. The comprehensive line comes in a vast array of styles and lighting loads. Their contemporary styling provides precise, dependable control and complements all home decors, while offering the potential for significant energy savings. Discover how Leviton’s lighting controls can be one of the easiest and most cost-effective ways to upgrade any living area.

Leviton Occupancy Sensor Wall Switch with LED Night Light Installation Sheet (.pdf)
Leviton Occupancy Sensor Wall Switch with LED Night Light Spec Sheet (.pdf)
Features:
- Features Manual-ON/Auto-OFF
- Convenient push-button provides manual ON/OFF light switching
at any time.
- LED NightLight offers “Guide Light” functionality
- Adjustable NightLight illumination
- Setting for continuous or dimmed NightLight
- Proprietary segmented Fresnel lens provides optimum sensitivity
and performance. Designed with an extensive “small motion” area
where even slight body movements will be detected.
- 180° field-of-view provides approximately 1,200 SF of coverage.
- Horizontal field-of-view may be adjusted between 180° and 32° of
arc by using integral blinders located on either side of the lens.
- One unit can be used for either 120V or 277V lighting.
Compatible with both electronic and magnetic ballasts.
- Relay switches at the zero crossing point of the AC power curve to
ensure maximum contact life and compatibility with
electronic ballasts.
- Fits in standard wallbox and replaces single-pole wall switch; ground
and neutral connection required. Gangable with other units.
- Available In Almond, Gray, Ivory, Light Almond, White
|