Features:

• Use to control home automation functions, garage door openers, house lights, alarm control panels, motorized gates, lifts or other devices by remote control.
  
• Mode switch for easy transmitter learning.
  
• Easily Code-learns up to 15 remotes per channel.
  
• Stores codes safely in EEPROM for up to one year in case of power loss.
  
• Four Form-C Dry Relay Contact (N.O./N.C./Common) Outputs. Each output rated 10 Amps at 24 VDC.
  
• 4 Separate Channels / 4 Output Modes Each:
  - Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.)
  - Toggle (On/Off)
  - Latch (Output stays on until manually reset)
  - Continuous or Validity (Output for as long as signal is received)
  
• All outputs are independently controlled. (i.e. Channel 1 can be toggle, Channel 2 can be one second momentary, etc.)
  Note: If the timed momentary output is chosen for any channel, there will be only one time available for all channels. In other words, if a one-second output time is selected for one channel, then all other timed momentary outputs will be one second.
  
• Size: 43/8" x 55/16" x 11/8" (111 x 135 x 28mm).
  
• Four LEDs (One LED for each channel) to indicate RF reception, learn mode entered, transmitted learned, memory cleared.
  
• Use to control the garage door, house lights, alarm control panel, or other functions that require momentary or shunt operation.
  
• In addition, these revolutionary receivers have:
  - Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
  - HIGHER SENSITIVITY for greater operating distances.
  - UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
  - GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.