NuTone Multiport Inline Ventilation System - NUMP280 available from Home Controls

Welcome to Home Controls December 04, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Pre-Designed Home Automation Systems (PDS) • PDS - HVAC & Climate Control • NuTone Multiport Inline Ventilation System
	PDS - HVAC & Climate Control

NuTone Multiport Inline Ventilation System
NUMP280
PRICE: $349.95
(NUMP280) NuTone Multiport Inline Ventilation System

QUANTITY:

NUTONE MULTIPORT INLINE VENTILATION SYSTEM

290 CFM VENTILATOR WITH FOUR 4" INLETS

Operating at 290 CFM the NUMP280 is capable of ventilating multiple problem rooms (bathrooms, laundry rooms, etc.) simultaneously. Constructed with four 4" inlets (each of which capable of handling extended duct runs) and motors designed for continuous operation, this ventilator is capable of distributing air from multiple sources throughout your home.

ELIMINATE INDOOR POLLUTION

With indoor air pollution causing various problems, having fresh, clean air should be a priority for everyone. With a properly installed continuous ventilation system, contaminants are removed with a quiet bathroom fan/ducted kitchen range hood. Then contaminants are diluted with a whole-house continuous ventilation system, preventing the contaminants of dissipating throughout your whole home. The constant exchange of stale air with fresh air that a ventilation system provides creates a healthier, more comfortable home.

Check out these additional products:

NuTone 6 Inch Inline Fan/Grille Kit, 250 CFM
NuTone Whole House Ventilation Fan

NuTone Multiport Inline Ventilation System Installation Guide (.pdf)
NuTone Multiport Inline Ventilation System Specification Sheet (.pdf)

FEATURES:

Blower

High pressure, centrifugal blowers accommodate many ducting configurations
Motors designed for continuous operation
Permanently-lubricated motors assure worry-free operation
Permanent Split Capacitor (PSC) motors are used for quiet operation and low power consumption
Plug-in motor rated at 120 VAC, 60 HZ operation
HVI certified to assure consistent operating performance

Housing

Rugged 20 gage steel housing finished with electrically bonded epoxy paint
May be installed in virtually any orientation - ceiling, wall or floor
In-line installation assures quiet operation
Easily removable panel permits quick access to blower for cleaning and servicing without disturbing ductwork
(4) 4" round inlets and 6" round outlet for easy duct connections
All wiring and ductwork can be connected from the outside of the housing - no need to remove access panel or blower.

SPECIFICATIONS:

290 CFM, 3.0 Sones.
Can be installed in virtually any orientation.
6” round outlet; 4” round inlets.
Use 2, 3 or all 4 inlet ports.
Two inlet duct covers furnished.
Plug-in blower simplifies service.
Air performance is HVI certified and AMCA licensed.