 
     |
|
| Welcome
to Home Controls
December 01, 2008 |
|
| Home • Products • Manufacturers • Elk Products • ELK Crystal Wireless Receiver, Input Expander | |
| Elk Products |
|
ELK PRODUCTS CRYSTAL WIRELESS RECEIVER COMPATIBLE WITH GE SECURITY 319.5MHZ CRYSTAL TRANSMITTERS The ELK-M1XRF2G is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144 wireless zones (e.g. transmitter sensors or points). The M1XRF2G receiver uses Crystal frequency technology and is a dual (2) antenna, phase diversity design capable of long range wireless coverage. The design of the M1XRF receiver provides for all transmitter programming and enrollment data to be stored in the control panel, not in the M1XRF. The only data stored in the receiver is a pre-filter or list of "valid transmitters" that is automatically updated by the control each time the sensor enrollment mode is exited. In regular operation the M1XRF is listening for sensor transmissions and passes data coming from "valid sensors" to the control for processing. The purpose of the pre-filter is to reduce the amount of unnecessary data bus traffic, particularly in locations where transmitters from an adjacent neighbor may be heard. The prefilter is automatically disabled during setup and enrollment so that it will be possible for newly enrolled sensor transmissions to reach the control. In the event a receiver ever needs to be replaced it should only be necessary to enroll the replacement receiver onto the data bus and then enter and exit the wireless setup programming. This would cause the pre-filter information to be updated and the new receiver to become operational. In the event that multiple M1XRF receivers are installed the storing of sensor data in the control makes it possible to use portable devices such as keyfobs without regard as to which receiver hears the transmission. The M1XRF2G is ONLY compatible with the 319.5MHz Crystal based transmitters available from GE. ELKM1G and ELKM1EZ8 Controls MUST be operating application firmware version 5.0.12 or higher in order to work with the ELKM1XRF Receiver. PREMIUM PRODUCTS FOR SECURITY AND AUTOMATION The M1 Gold and the new M1EZ8 offer a rock solid security foundation with the most imaginative automation functionality available. Key features common to both systems include the versatile keypad, flash memory firmware, fast PC programming, and ease of installation. Both systems offer the flexibility to integrate with industry standard systems and components for easy upgrades and system expansion.
The benefits of operating from the data bus are: 1) A receiver can be installed virtually anywhere in the building for convenience and optimum coverage. 2) Multiple receivers (up to 11 total) can be connected to a single control for ultimate range and/or coverage redundancy. The major benefit of having multiple M1XRF2G receivers is that hundreds if not thousands of square feet can now be covered by strategically placing each receiver in a different geographic location. FEATURES:
SPECIFICATIONS:
|
|
|
About HCI |
Home Automation FAQ's | Shipping Policy | Return Policy | Contact Us |
Site Help |
Sitemap © Copyright 2008, Home Controls Inc. All Rights Reserved ph. (800) 266-8765
|
Powered by
){kind=link}