ELK M1 Ethernet Port Expander Interface - ELKM1XEP available from Home Controls

Welcome to Home Controls December 01, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Manufacturers • Elk Products • ELK M1 Ethernet Port Expander Interface
	Elk Products

ELK M1 Ethernet Port Expander Interface
ELKM1XEP
PRICE: $214.95
(ELKM1XEP) ELK M1 Ethernet Port Expander Interface

QUANTITY:

ELK M1 ETHERNET PORT EXPANDER INTERFACE

INTERNET CONNECTIVITY FOR THE M1 CONTROLLER

Allows M1 Gold to be connected to the Internet or LAN (network) for programming, monitoring, remote control, email notifications, etc. Requires permanent broadband connection; Cable Modem, DSL, T1, etc.

The ELKM1XEP is an ethernet device server with an RS-232 serial port interface. It may be used to connect an M1 controller to an ethernet network using TCP/IP protocol. It features a secure embedded web server, with a user interface built on a Java applet, email notification, and encryption algorithms for security sensitive environments.

The ELKM1XEP is powered with the included 12 VDC,, 1.5 Amp, plug-in power supply. A software set-up utility is built into the ELK RP (version 1.5.0 or later) for configuring the connection set-up, network password, etc. The unit is factory defaulted to obtain a dynamic IP address from a DHCP (i.e., ethernet switch, cable modem, etc.), however, it may also be used with a static IP address.

M1 CROSS PLATFORM CONTROL

ELK Products, Inc. designs and manufactures premium quality electronic equipment for the professional security and automation installer. ELK's M1 Cross Platform Control Family integrates rock solid security and full featured automation providing convenient user interfaces and remote control options. M1 can be integrated with other manufacturers systems for complete control of home or business.

FEATURES:

Web server with embedded Java applet "M1 Virtual Keypad"

Secure connection with password protection and HTTPS encryption

Flash memory for firmware updating

Event notification via e-mail (SMTP)

Internet monitoring and reporting capability

URL updating using dynamic DNS

TCP/IP stack supporting the following protocols: TCP, UDP, DHCP, SSL 3.0/TLS, 1.0, HTTP, SMTP

Federal Information Processing standards (FIPS) 128 bit encryption

Integrated 802.3 compliant 10/100 MBit network interface

RS232, DB9M 9-pin serial port connection

Connects to the M1 RS232 serial port (port 0). Baud rate must be set to 115,200.

RJ-45 8-pin network jack

2.1 mm barrel type power connector (center positive)

LED indicators for Power, Link, and Data

SPECIFICATIONS:

Operating voltage: 12 VDC (ELKP1216 plug-in power supply included)

Current draw: appox. 300 mA

Housing 4.25" x 6.375" x 2.125"

Circuit board dimension: 2.25" x 3.95"

6-foot serial cable included