Simply Automated Ultra-Reliable UPB Dimmer Lighting Controls, 900W, White

Welcome to Home Controls October 13, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Manufacturers • Simply Automated • Simply Automated Ultra-Reliable UPB Dimmer, 900W, White
	Simply Automated

Simply Automated Ultra-Reliable UPB Dimmer, 900W, White
SAUS1140W
PRICE: $59.96
(SAUS1140W) Simply Automated Ultra-Reliable UPB Dimmer, 900W, White

Click Here for Larger Image

QUANTITY:

Green and Eco-Friendly Product
On Sale!

SIMPLY AUTOMATED UPB SINGLE DIMMER 900W, WHITE

NEW AND IMPROVED UPB DIMMER-CONTROLLER

NEW from Simply Automated! Replaces the SAUS1130W

SAUS1140W is a smaller size to fit tighter J-boxes, blue and green LED matches SAUS240 for consistancy, and new thermal switch protects from overload. This upgrade IS backward compatible with the SAUS1130W.

Ultra-Reliable Digital UPB powerline control products by Simply Automated are now here at affordable pricing! Features no new wires, amazing flexibility, 99.9% reliability, 2-way capability and no noise interference issues!

Finally there is an ultra-reliable powerline carrier home control technology that is easy to install. Using a new digital protocol communicating over the powerline, Universal Powerline Bus (UPB) technology significantly improves the reliability of control applications in the home. UPB has been proven to be greater than 99.9% reliable, so you can install it and forget about it... without any unpleasant noise issues!

Simply Automated's 900 watt dimmer body with a full rocker keypad comes in white with this part number. Keypads are replaceable with single rocker (black, brown, ivory or almond) or dual vertical rocker (Black, brown, white, ivory, or almond) for the ultimate in flexiblity and functionality. You can also purchase rocker body switches without the rocker faceplate, and buy the rocker faceplates separately.

The SAUS1140W provides one traveler wire for three or more way, remote-switch applications. For applications requiring multiple rockers and travelers, please use the Deluxe UPB Dimmer-Controller, model SAUS240.

SIMPLY AUTOMATED WITH UPSTART FOR WINDOWS

No home automation software is required to control UPB products. Basic programming functions are achieved using simple push buttons on the wall switches and modules. Advanced programming options require UPStart UPB Configuration Software. Click the link below for the free software. UPStart is a Windows-based program that is used for configuring purposes only, and requires an Interface Module to connect to a PC in the home (SAUMCDB9W)

Ultra-Reliable UPB Dimmer, 900W, White Data Sheet (.pdf)

Ultra-Reliable UPB Dimmer, 900W, White, Instruction Guide (.pdf)

FEATURES:

Every switch is a dimmer, a relay switch AND a transmitter depending on how you program it.
Robust, trouble-free installation
Easy to retrofit...no new wires
Exceptional reliability and noise immunity
High signal strength and low frequency means UPB can communicate over very long A/C wire runs over one mile in length
UPB addressing system uses 250 Unit ID's and 250 Network ID's for a total of 62,500 unique network addresses...plus a secure network password!
Reliable 2-Way digital communication. The transmitter sends a signal and listens to a response from the receiver. The transmitter will continue to re-transmit the signal up to 4 times until it recieves that response
Super-fast command-to-action time...less than 1/3 of a second
Can be used with other PLC systems such as X10 in the same house without interference
Can be used for stand-alone scene lighting control, or with a central controller
Supported by HAI Omni, Stargate, CommStar, ELK M1, Premise Home Control, HAL2000 and more
Each device can be programmed to be part of up to 15 scenes without an intelligent controller
200 dimming steps and variable fade rate from instant-on to a fade rate of up to one hour
The LED lights on the switches can be programmed to show a different color for a different load status, and a locally switched dimmer can be programmed to send a status report to the controller
Shallow switch depth allows for easier J-box installation

SPECIFICATIONS:

Power requirements: 120VAC +/- 10%, 60 Hz
Max Load: 900W incandescent and magnetic low voltage
Wiring Connections: 6" stranded pigtails, #16 AWG for power/load #20 AWG for multi-way travellers.
Operating Temp: 30-120 deg F (0-50 deg C)
Dimensions: 4.2H x 1.7W x 1.6D"
Depth inside J-box 1.33"

Configuration Software for Windows

Download Crestron UPB Driver Module

SAUS1140W Datasheet