Linear Supervised Pattern Recognition Technology Glass Break Detector

Welcome to Home Controls December 01, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Security and Property Protection • Glassbreak Sensors • Linear Supervised Pattern Recognition Technology Glass Break Detector
	Glassbreak Sensors

Linear Supervised Pattern Recognition Technology Glass Break Detector
LNTGB96
PRICE: $68.39
(LNTGB96) Linear Supervised Pattern Recognition Technology Glass Break Detector

(LNTGB96) Linear Supervised Pattern Recognition Technology Glass Break Detector

QUANTITY:

BLOW OUT SALE!
Priced BELOW our cost!
Don't miss this deal!

LINEAR WIRELESS GLASS BREAK SENSOR

ADVANCED ACOUSTIC SENSOR

The LNTGB96 is a glass break detector with a built-in transmitter designed for use with Linear’s SX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its companion receiver/control. The digital SX code format features more than one million possible codes. Each transmitter is precoded at the factory to a unique code so no field coding is required. The TGB-96 can send three different signals; alarm, low battery and status.

The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two years under normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or test transmission.

LINEAR WIRELESS TRANSMITTERS

The SX product family is Linear's premiere RF format offering full supervision of the RF link, tamper supervision, over sixteen million factory pre-set codes and a RF coding format that incorporates bit error detection and correction processes in the receiver for the highest level of noise rejection and signal integrity. The receivers use SAW-based super heterodyne technology and include a receiver that can add 64 zones of fully supervised wireless technology to any existing hardwire panel. SX products are available in a North America frequency of 303.875 MHz and Internationally at 433.92 MHz.

Linear LNTGB96 Wireless Glass Break Detector Manual (.pdf)

Specifications:

Dimensions: 4.25 in W x 3.13 in H x 1.70 in D (108 x 80 x 43 mm)
Mounting: screws or double sided tape (supplied)
Power: two 3V DL2450 lithium batteries (supplied)
Battery Life: up to 3 years
Operating Temperature: 32° to 122° F (0° - 50° C)
Frequency: 303.875 MHz (North America), 433.92 MHz (intl.)
Number of Codes: 16,777,216
Code Setting Method: factory programmed
Glass Detection Range: 20 ft radius typical, 25 ft max
Glass Detection Method: pattern recognition technology