Linear Supervised Glass Break Detector Transmitter - LNDXS91 available from Home Controls

Welcome to Home Controls December 01, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Security and Property Protection • Glassbreak Sensors • Linear Supervised Glass Break Detector Transmitter
	Glassbreak Sensors

Linear Supervised Glass Break Detector Transmitter
LNDXS91
PRICE: $104.95
(LNDXS91) Linear Supervised Glass Break Detector Transmitter

QUANTITY:

LINEAR SUPERVISED GLASS BREAK DETECTOR TRANSMITTER

ONE MILLION POSSIBLE CODES

The Model DXS-91 Supervised Glass Break Detector Transmitter is a glass break detector with a built-in transmitter designed for use with Linear's DXS and DX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its companion receiver/control.

The digital DX code format features more than one million possible codes. Each transmitter is precoded at the factory to a unique code so no field coding is required. The DXS-91 can send three different signals: alarm, low battery and status.

The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two and one half years under normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or test transmission.

LINEAR WIRELESS TRANSMITTERS

The SX product family is Linear's premiere RF format offering full supervision of the RF link, tamper supervision, over sixteen million factory pre-set codes and a RF coding format that incorporates bit error detection and correction processes in the receiver for the highest level of noise rejection and signal integrity. The receivers use SAW-based super heterodyne technology and include a receiver that can add 64 zones of fully supervised wireless technology to any existing hardwire panel. SX products are available in a North America frequency of 303.875 MHz and Internationally at 433.92 MHz.

Linear Supervised Glass Break Detector Transmitter Manual (.pdf)

General Specifications

Dimensions: 4.25 in W x 3.13 in H x 1.7 in D (108 x 80 x 43 mm)

Power: Two 3V DL-2050 lithium batteries (supplied)

Battery Life: 18 months

Measured Range: 1,000 feet, open air, with DVS-2400 control panel

Code Outputs: Alarm, supervisory, and low battery

Detection Method: Pattern recognition

Temperature Range: 32° to 120° F (0° to 49° C)