| |
|
WINLAND ENVIROALERT MONITORING CONSOLE, 8 ZONES
MULTI-ZONE COVERAGE FROM WATER, TEMPERATURE AND HUMIDITY
Monitor up to eight sensors (4 wireless, 4 hardwired) for temperature, humidity, water detection, and industrial measurements such as pressure or flow. With a designated relay output for each sensor, the EnviroAlert EA800 will activate alarms, dialers or transmitters when programmed limits have been exceeded. Features: Data logging - capture and download sensor readings, alarm and event history; Simultaneous operation of eight sensors; Defrost time delay up to 120 minutes; Easy to read large LCD display; Auxiliary output relay for local audible alarm; Auxiliary alarm silence feature with 10 minute timer; Temperature and humidity High/Low set points; Output relays can be configured to be initially energized or de-energized; Tamper proof password lock setting; Snap fit mounting base with main housing for easy access; Plug in terminal strip connectors for easier wire termination; Current sensor readings are displayed on home screen; and Sensor configuration retained in memory if power is lost.
INNOVATION FROM WINLAND
The EnviroAlert monitoring and alarm devices provide precise monitoring of critical environments by utilizing an on-board temperature sensor or attaching any one of the remote temperature, humidity and water sensors. Receive multi-sensor coverage from simultaneous operation of the sensors. If any sensor being monitored deviates from the preset limits, a relay output sends a signal to an appropriate warning system.

EA800 Quick Start Guide (.pdf)
EA800 Owner's Manual (.pdf)
Features:
- Data logging - capture and download sensor readings, alarm and event history
- Simultaneous operation of eight sensors
- Defrost time delay up to 120 minutes
- Easy to read large LCD display
- Auxiliary output relay for local audible alarm
- Auxiliary alarm silence feature with 10 minute timer
- Temperature and humidity High/Low set points
- Output relays can be configured to be initially energized or de-energized
- Tamper proof password lock setting
- Snap fit mounting base with main housing for easy access
- Plug in terminal strip connectors for easier wire termination
- Current sensor readings are displayed on home screen
- Sensor configuration retained in memory if power is lost
Specifications:
- Console Size: 8.13" x 5.52" x 1.93" (20.6 cm X 14.0 cm X 4.9 cm)
- Weight: 1.0 lb
- Low and High Limit Adjust Range: Temperature -112° F to +302 ° F; Humidity 5% to 95% Relative Humidity
- Input Voltage: +11 to +26 VDC @ <500mA
- Number of wireless sensor inputs: 4
- Number of wired sensor inputs: 4
- Unit Operating Range: +32 to +122° F
- Alarm Outputs: 8 - SPDT Relays (Configurable)
- Auxiliary Audible Alarm Output: 1 - SPDT Relays (Non-configurable)
- Power Requirements: +11 to +26 VDC @ ≤500mA
- Unit Operating Range: +32 to +122° F (0 to +50° C)
- Piezo Buzzer Duration: Continuous
- Piezo Buzzer Sound Pressure Level: 88 dBA (min) @ 10 cm
- Mounting: Mounts to 3-gang Electrical Box
- Case Material: ABS
|