| |
Steren HDMI Cable
ST5168
PRICE: $14.95
|
 |
|
|
STEREN HDMI CABLE
VARIOUS LENGTHS FOR CLEAN INSTALLATION
Providing the maximum in video and audio signal connectivity, Steren's HDMI
male-to-male cables are suitable for HDTV sets, plasma screens and computer
monitors. Steren's precision manufactured, fully molded cables feature AWG28 tinned copper conductors and 24K gold-plated beryllium
copper contacts. The ultimate in integrity and interference protection for these
high-performance cable assemblies is ensured through individually shielded wire
pairs with drain wire, 100% Aluminum/Mylar foil shield, 95% tinned copper braiding
and 100% tinned-steel shielded connectors.
A LITTLE ABOUT HDMI CABLE
HDMI cables support the highest video resolution possible and
accurately transfer multichannel digital audio. HDMI cables connect any HDTV set-top boxes, DTV, DVD, switch or splitter with HDMI. HDMI cable supports high-bandwidth, uncompressed video and multi-channel digital audio, has double shielding for maximum video performance, prevents signal loss & screen ghosting. cables have matched impedance, PVC jacket, molded ends and inner hood soldered 360 degrees to the connector for complete end to end shielding.
Check out these additional products:
Steren 3X8 TV-Satellite Multi-Switch
Home Theater & Entertainment

Steren HDMI Cable Tech Sheet (.pdf)
FEATURES:
- Ideal for HDTV sets, DVD
players/recorders and
set-top boxes
- Compatible with all
HDMI devices
- Carries high-definition
digital video and multi-channel
audio in one cable
- Supports video resolutions up to
1920 x 1080 and data rates
to 5Gbps
- Fully molded construction
- Super-flexible satin black
PVC jacket
- AWG28 tinned copper
conductors
- 24K gold-plated contacts
SPECIFICATIONS:
Cable
Mechanical Construction
- Outer Jacket: PVC, Black, 7.0mm
- Outer Braid: Tinned Copper, 95%, 240 x 0.12mm
- Outer Shield: Aluminum/Polyester Film, 0.03mm, 50% Overlap min
- Wire Pairs (4):
Shield: Aluminum/Mylar Film, 0.03mm, 50% Overlap min
Drain Wire: Tinned Copper, AWG28, 7 x 0.12mm
Wire Jacket: Polyethylene, 1.03mm
Wire: Tinned Copper, AWG28, 7 x 0.12mm
- Loose Wires (7):
Jacket: Polyethylene 0.68mm
Wire: Tinned Copper, AWG28, 7 x 0.12mm
Electrical Properties
- Current: 0.5ADC
- Voltage: 300VDC
- Insulation Resistance: 50M½
- Conductive Resistance: 20½
- Intra-Pair Skew: 151psec max
- Inter-Pair Skew: 2.42nsec
- FEXT: <-26dB
- Attenuation:
300kHz~825MHz <8dB
825MHz~2.475GHz <21dB
2.475GHz~4.125GHz <30dB
- Differential Impedance: 100½ ±10%
- Complies with HDMI specification v1.1
Connectors
Mechanical Construction
- Connector Overmold: PVC, Black
- Connector Shell: Gold-Plated Copper
- Shield: Tinned Steel, 100% Coverage
- Dielectric: Polyethylene, Black
- Contacts: Gold-Plated Beryllium Copper
Electrical Properties
- Contact Resistance: 10m½ max
- Dielectric Strength: 500VAC rms
- Insulation Resistance: 100M½ min
- Contact Current: 0.5A min
- Applied Voltage: 40VAC rms continuous
- Electrostatic Discharge: 8kV
- TMDS Impedance: 100½ ± 15%
- TMDS FEXT: 5% max
- Complies with HDMI specification v1.1
|