Seco-Larm Passive Video Balun - SEEVTPB1Q available from Home Controls

Welcome to Home Controls January 08, 2009

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Home Theater & Entertainment • Video Distribution Equipment • Seco-Larm Passive Video Balun
	Video Distribution Equipment

Seco-Larm Passive Video Balun
SEEVTPB1Q
PRICE: $24.95
(SEEVTPB1Q) Seco-Larm Passive Video Balun

QUANTITY:

CAT 5E Wire, 1000FT
WRCAT5E10
PRICE: $119.95

Steren F Jack to BNC Plug Adapter
ST200130
PRICE: $0.89

RG59/BNC Twist On Connector
ST200142
PRICE: $0.49

Steren RJ11 Male Crimp-On Phone Connector
ST300064
PRICE: $0.09

SECO-LARM PASSIVE VIDEO BALUN

SEND UP TO 4 VIDEO SIGNALS ON A SINGLE CAT5

The fast, easy, and low-cost way to connect a CCTV camera to a monitor, multiplexer, or video recorder. Video baluns allow the video signal of a single CCTV camera to be transmitted long distances over low-cost CAT 5 unshielded twisted pair (UTP) cable. They are great for both full-motion color and full-motion monochrome cameras, and increase the flexibility of where such cameras can be mounted. These CCTV baluns also work over existing UTP cabling, making them perfect for use in nearly any building or across an entire campus.

ADVANTAGES OF USING BALUNS FOR VIDEO SIGNAL TRANSMISSION

Transmits a monochrome video signal up to 2,000 feet (610 meters) or color up to 1,300 feet (400 meters).
Passive operation - No external power required.
Uses low-cost CAT 5 cable instead of costly coaxial cables.
Includes a BNC connector and a terminal block - No need to waste time crimping RJ-45 connectors.
High immunity from interference - Built-in impedance coupled device and noise filter.
Quick-connect screwless terminal block for easy installation.
Gold-plated BNC connector for added reliability and longer life.
Small size allows the mounting of multiple baluns behind multiplexor without pigtails.

Video Format : RS170, NTSC, PAL, SECAM, CCIR
Maximum Input: 1vpp
Insertion Loss: < 2dB per pair from DC ~ 5 Mhz
Return Loss: > -15dB from DC ~ 5 Mhz
Frequency Response : DC ~ 5 Mhz
Attenuation : DC ~ 5 Mhz, 1.5 dB max
Common Mode Rejection : 60 dB, 15 KHz~5 MHz
Impedance : Coax, Male BNC 75 Ohms @ 1 MHz Terminal Block 100 Ohms @ 1 MHz
Power : No power required
Temperature Range : 140~1650 F (-100~740C)
Humidity Range : 0 ~ 95%
Wire Type: UTP (Unshielded Twisted Pair) 16 - 24 AWG
Wire Category : Category 2 or better
UTP Connection : Terminal Blocks
Case: ABS Plastic