| |
|
NEOPRO CONCORD 8x8 AUDIO/VIDEO MATRIX SWITCH
FEATURES INDEPENDENT AUDIO AND VIDEO SWITCHING
The Concord is an 8 Input x 8 Output Matrix Switch for HD Component video, composite or digital
audio, and analog audio. All inputs are RCA connector, and all outputs are RJ45 connectors. The
Concord can transmit audio and video up to 1000 feet on Cat5e cables with outstanding video performance.
The receiver unit (Sold Separately) features a Decora style insert with
all six RCA connectors, and is powered completely from the Concord main unit.
Available In Silver Chassis with Black Face and Black Chassis with Black Face.
ABOUT NEOPRO
NeoPro was started in 2005 with the specific goal to provide solutions that are high
performance, integrate well with other components, and give you the flexibility required to
connect everything together without making sacrifices. NeoPro products typically have unique
feature sets, and are designed to have a high quality fit and finish, and are sold primarily on
features and design, rather than price.

Concord 8x8 A/V Matrix Switch Information Sheet(.pdf)
Concord 8x8 A/V Matrix Switch Instruction Manual (.pdf)
Features:
- HD component video (YPbPr) up to 1000’
- Full non-blocking matrix - no routing limits
- Decora style receiver, white or black lettering
overlays can be put on after painting
- NeoTouch™ front panel - no moving parts to jam.
- Multiple control inputs - RS-232, USB, IR detector
(front) and wired IR (rear)
- Highly visible Vacuum Fluorescent Display (VFD)
- Separate front panel indicators for IR and RS232 activity
- Front panel lockout, Front panel blackout
Specifications:
- Power Inlet: IEC 320-C14
- Input Voltage: 90-240VAC 50-60Hz, 45W typical
- Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
- Video bandwidth: 140MHz+ (full 1080p)
- Analog audio bandwidth: 0 Hz to 200KHz
- Digital audio modes: PCM, LPCM, Dolby, DTS
- Digital audio/C-video bandwidth: 20MHz
- RS-232: 9600 baud, full two-way protocol
- USB: Slave device, Windows driver included, MAC and Linux drivers available - installs as virtual COM port at 9600 baud
- Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive
|