Channel Vision, Audio/Video Amplifier Kit, 4 Source, 6 Zones

Welcome to Home Controls January 08, 2009

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Home Theater & Entertainment • Audio Distribution Components • Channel Vision, Audio/Video Amplifier Kit, 4 Source, 6 Zones
	Audio Distribution Components

Channel Vision, Audio/Video Amplifier Kit, 4 Source, 6 Zones
CVAKIT1
PRICE: $1589.95
(CVAKIT1) Channel Vision, Audio/Video Amplifier Kit, 4 Source, 6 Zones

(CVAKIT1) Channel Vision, Audio/Video Amplifier Kit, 4 Source, 6 Zones

Click Here for Larger Image

QUANTITY:

CHANNEL VISION AUDIO / VIDEO AMPLIFIER KIT, 4-SOURCE; 6-ZONE

MULTI-ROOM IR CONTROL

CVAKIT1 Audio Matrix Kit contains:

(1) A4601- Multi-Room Multi-Source Audio Video Matrix

(1) A1260 - 12 Channel 60 Watt Local and Global Source selectable Amplifier

(4) IR-3003 - Expandable IR Emitters (Use one head per source to control from the remote room.)

(6) 3' RCA stereo interconnects

(6) A0127 - Control Keypads (Preprogrammed to control the A4601 and is capable of teaching its commands to a learning IR remote control.)

Channel Vision CVA1260 12 Channel Audio Amplifier
The A1260 is a 12 channel audio amplifier designed for whole-house audio systems. The amplifier is organized into 6 stereo pairs. Each pair may be driven with a system wide signal, or its own input.

Each of the 12 channels will turn on automatically at the presence of an audio signal and will turn off when the audio signal is gone. Unlike other, zone-by-zone power sensors, this allows up to 12 independent monaural channels.

The A1260 is intended to be constantly on. Power consumption during times of no audio is less than 30 watts.

Features:

Each zone may be switched between the global input and the local input.

Sources connected to Global input can be heard in all 6 zones.

110-120 or 220-240 operation

Each channel has independent turn-on sensors.

Torroidal power transformer with 4 secondaries to maximize separation.

Computer-grade components throughout to ensure long-life.

Turn on time <500msec Turn off time ~ 30-100 seconds

Ideal companion to A4600 Matrix A/V controller

Specifications: (typical @25º C)

Output Frequency Range: 20-20kHz
Output Level:
- 60 W/ch 8ohms
- 60 W/ch 4 ohms
  (With 120VAC or 240VAC input)
Turn on delay: < 500msec
Turn off delay: ~ 30-100 seconds
THD: < .1% @ 1kHz
Power Consumption: < 35 W (no input)
Operating Temperature: -10ºC to +60ºC
AC fuse: 10A Slo-blo 5x20mm

Channel Vision 4 x 6 A/V Matrix Controller
The A4601 is a 4 input 6 output matrix A/V controller designed for whole-house audio systems.

The unit is organized into 4 audio/video inputs and 6 audio/video outputs. The A4601 is intended to be used with a multichannel audio amplifier, such as the A1260.

Any of the 4 source inputs can be selected and routed to any of the 6 outputs (or zones) independent of the other zones through the use of an IR repeating keypad.

Control of the A4601 is accomplished through the use of an IR repeating device, such as the A0127 keypad. The A0127 already contains the IR codes necessary to operate the A4601, but you may also use a standard IR receiver or a 3rd party keypad. When using a simple IR receiver, you will need to program a learning remote control with the IR codes for the A4601.

Features:

Selector switch allows 110-120 or 220-240 operation.

Power switch.

When splitting the video signal from a source component, use the dip switch to enable the Hi-Z mode on that input.

IR emitter outputs allow IR-3002 flashers to be connected for remote control of source components.

Each zone is controlled through the A0127 keypad which connects to the RJ45 jacks on the rear panel.

Computer-grade components throughout to ensure long-life.

Ideal companion to A1260 amplifier

Specifications:
Audio

Bandwidth: 20-20kHz
Crosstalk: -90 dB
Dynamic Range: 6.0 Vp-p
THD: 0.01%

Video

Bandwidth: DC-20MHz
Crosstalk: -60 dB

CONTROL DEVICES WITH IR

IR repeating allows the user to control devices which are not within the direct line of sight of the remote control. This is most commonly used in distributed audio/video systems where the source components are centrally located.

Check out these additional products:

Channel Vision, IR Receiver, 2 Piece, Remote Head
Channel Vision, IR Over Coax Starter Kit

Channel Vision CVA1260 12 Channel Audio Amplifier (.pdf)

Channel Vision CVA4601 Multi-Room Multi-Source Audio Video Matrix (.pdf)