OEM In-Wall Stud Woofer, 10 Inch Single Voice Coil - OESE10SW available from Home Controls

Welcome to Home Controls November 20, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Home Theater & Entertainment • In Wall Speakers • OEM In-Wall Stud Woofer, 10 Inch Single Voice Coil
	In Wall Speakers

OEM In-Wall Stud Woofer, 10 Inch Single Voice Coil
OESE10SW
PRICE: $249.95
(OESE10SW) OEM In-Wall Stud Woofer, 10 Inch Single Voice Coil

QUANTITY:

OEM STUD WOOFER 10" SINGLE VOICE COIL

FORGET ABOUT UNSIGHTLY SPEAKER CABINETS!

Perfect for the latest Home Theater technology. The STUD Woofer is for people who want an In-Wall Subwoofer that is a near equal to the sound quality of the best cabinet type Subwoofers, but do not want the inconvenience or unsightly situation of fitting another speaker cabinet into their living furniture.

The STUDWoofer is a 10" In-Wall Subwoofer designed to be installed in standard 2" x 4" & 2" x 6" walls with drywall as thin as 1/2" without any need for reinforcement, blocking, etc. It does not require any special bracing or wall modification. It fastens directly to 16" on-center studs and will not work itself loose from the drywall. Use in new & existing construction, it is easy to install and completely retrofitable.

The SE-10SW is a single channel model, one may be driven directly by an amplified Mono low pass signal or two separate units may be driven by amplified Stereo low pass signals. One or two SE-10SW may be fitted with modular 10-MX passive Mono crossovers for high level single channel in with single channel low & high pass out for use with a satellite speaker(s).

IN WALL STEREO SYSTEMS

In wall stereo systems allow you to place a complete stereo system in the listening area and not take up valuable floor space. The OEIWSYS3 is ideal for permanent installation in homes, custom mobile homes, van conversions, RVs, or any other installation where space limitations become a factor.

10" butyl surround polypropylene driver
Tuned twin port design
Tuned for optimum performance in a wide variety of wall configurations, including standard 2" x 4" & 2" x 6", 7' 10" high residential walls
Supplied with port plugs which enable the STUD Woofer to be used in infinite baffle arrangements
Cut-out dimensions: 14 1/2" W x 16 1/2" H
Mounting depth: 3 3/8"
Overall dimensions: 19 1/2" x 19 1/2", 1 3/4" Face Refief
Frequency Response: 25 - 200 Hz
87 dB @ 1 W/m
Power Handling: 150 watts max
8 Ohms nomial